Toll Free: 866-318-6186    Email: sales@hotektech.com

 
 
Instruments, calibrators, standards, analyzers, dataloggers. analyzers
 
  Test measurement instrumens. Analytical instruments, ph meters, dissolved oxygen meter, hygrometer, salinity meter, weather instruments. Power analyzers, Gas combustion analyzer, Electronic load, Harmonic analyzer. Pressure calibrator, deadweight tester, temperature calibrator, current loop calibrator. Temperature datalogger, humidity datalogger, barometric pressure datalogger, wireless datalogger. Hygrometer, humidity datalogger, HVAC instrument, humidity controllers transmitters. Candela meter, Luminance meter, Radiometer, Albedometer, Luminance transmitter. Cable detectors, coil tester, insulation resistance, resistance bridge, tachometers. Digital multimeter, clamp on meter, amperometer, current meter, high line voltmeter, phasing sequence meter.  
  Resistance bridge, ohmmeter, insulation resistance meter, multimeters, milli ohmmeter, micro ohmmeter, megohmmeter. Manometer, Pressure gauge, deadweight tester, pressure pump, vacuum pump, pressure calibrator. Simulator, Calibrator, resistance standard, resistor decade, inductance standard, thermometry standards. Thermometry bridge, precision thermometer, infrared thermometer, temperature calibrator, dry block calibrator. Current transmitter, Luminance transmitter, energy transmitter, pressure transmitter, temperature transmitter.  
 

Search  

 
 
 

CALIBRATION UNIT FOR SUBMARINE CABLE TEST SET


5906A and 5906B Calibration Unit for Submarine Cable Test Set
These units enable the Model 5902 to be calibrated at sea by its operators with out the necessity for it to come ashore or to be returned to headquarters. 

Model 5906A Insulation Resistance and Capacitance

Calibration unit for submarine cable test set
Our Price: Contact us for pricing
Phone: 253-927-6186
866-318-6186
Fax: 253-927-6189
email: sales@hotektech.com

The Model 5906A provides high stability Standard Test Resistors and Capacitors to 
calibrate the Insulation Resistance and Capacitance measurement facilities of the 
Model 5902 and similar Long-Haul Submarine Cable Test Sets. 

Internal standards include: - 
Insulation Resistance 100KΩ 1MΩ 10MΩ 100MΩ 1GΩ
Maximum Voltage 1000Vdc
Capacitance 1mF 10mF 50mF 250mF
Maximum Voltage 520Vdc

A discharge button and charge meter help ensure operator safety.
Full calibration procedures and certificates are provided.

Model 5906B Conductor Resistance.

The Model 5906B provides high stability 
Test Resistors  to calibrate the Conductor
Resistance measurement facilities of the
Model 5902.  
It can be used in both constant current and
constant voltage modes. 

Forced air cooling is provided for high power tests. 
An over temperature buzzer sounds if temperature
limits are likely to be exceeded.

Internal standards include: - 
Conductor Resistance 10Ω 100Ω 1KΩ 5KΩ 10KΩ 100KΩ
Maximum Current 220mA 100mA 30mA

The unit can be used on both 110 and 230 Volt supplies and comes complete with test leads and connectors.

Full calibration procedures and certificates are provided.

Please email sales@hotektech.com or call 253-927-6186 if you are interested in a purchase, or
  need additional information.

[Home] [Top] [Distribution] [Contact Us]