MODEL 23 DC Car Battery Tester simultaneously measures
car battery voltage UB and internal
battery resistance Ri.
The sophisticated electronics used in this tester yield measurements in less than 1 second.
Measurements repeat within ±1 digit even when batteries are being charged.
The two step test is done at no load and at a 30A load. Car electronics do not have to be disconnected.
Deteriorated batteries are easily spotted and are graded GOOD, FAIR, FAIL.
You can store and retrieve all data for your ISO 9000 Quality Assurance System.
Test results can be printed.
DC 23 Car Battery Tester
|DC-23 Car||Car Battery Tester without RS-232 - carrying case, load and probes.|
|DC-23 Car Full||Car Battery Tester with RS-232, case, software, printer, battery pack|
Ri: 20/400/8000 milliohm
Ub: 30/120 Volt
15,5 x 9 x 3,5cm; 400gr.
Data storage, RS-232
Testing Car Batteries with Tester (Starter Batteries)
Starter batteries have a capacity of 50-120Ah. When fully charged their internal resistance is from 3mOhm to 20mOhm.
There is a large range of battery types (different manufacturer) on the market, and therefore the measurement of Ri alone can not be used to detect bad batteries.
Furthermore, when a car is brought in with battery trouble the battery is in an undefined state.
Therefore, without using additional means the health of care battery can not be determined.
|Full Version|| MODEL 23 DC-Source Battery Tester with RS-232 and Carrying case,
windows software, label printer, battery pack for printer, 4-wire measuring
clips and RS-232 cable to PC. Weight 3kg.
|Med Version|| MODEL 23 DC-Source Battery Tester with RS-232 and Carrying case,
windows software, 4-wire measuring clips, RS-232 cable to PC.
|Gen Version||MODEL 23 DC-Source Battery Tester without RS-232 and Carrying
4-wire measuring clips.
|Car Full|| 23 DC-Source Car Battery Tester for car battery testing with RS-232 and
Carrying case, battery load, label printer and measuring clips.
|Car|| 23 DC-Source Car Battery Tester for car battery testing without RS-232 with
carrying case, battery load and measuring clips.
|ACS10|| USB - RS232 Adapter.
|ACS11|| Ethernet - RS232 Adapter
|ASC12|| Battery Charger
|Size of Batteries||Test batteries 0.5Ah-2000Ah and voltages up to 120V|| sealed, non-sealed;
lead acid and other
|Voltage Ub|| Ranges 2; 0-30V, 0-200V
Resolution; 10mV, 0.1V
Accuracy; 1% ± 1 digit
| 200Vdc maximum
Display; 3 digits
23° ± 3°K
|Source Resistance Ri|| Ranges 3; 0-20 milliohm, 0-400 milliohm, 0-8 Ohm
Resolution; 0.01, 0.1 milliohm
Measurement repetition; ±1 digit
Accuracy; 1% ± 2 digit
| Ub: 1.6V-120V
Display 3 digits
Signal max 20dB below noise
|Display||6.5mm, 16 character LCD||V, milliohm, Mode|
|Interface||RS-232, isolated from batteries||300V CAT II|
|Operation/Time||Via menu, 3 controls||0.6s measurement time|
|Data Storage||500 complete sets UB, Ri||N=1 to N=500|
|Supply||9V battery or accumulator||for 6-8h operation|
|Size/Weight||155 x 90 x 35mm; 400 gr.|
|Temperature||Operating: 0-30°K; storage: -10 -40°K|
|Tester versions|| Full: Tester, printer, software
Med: Tester, software
Gen: Tester, no interface
Car: Tester including battery load
Car Full: Tester including battery load, printer
| Stationary batteries