SINEAX F 534 Frequency Transducer
Our SINEAX AC frequency transducers measure the supply frequency of systems with sinusoidal,
rectangular or disturbed input voltages with dominating fundamental wave.
The measurement of the phase angle difference of two power systems provides one of the three
values which are necessary for their synchronization
Sine, Rectangular or Distorted Wave Forms
Available as Measuring Source Powered to 230 V
24-60 VAC/VDC or 85-230 VAC/VDC Powered
Input: 10 V to 690 V, 10 to 1500 Hz
Output: 0-1 mA to 0-20mA, 1-5 mA to 4-20 mA,
± 1 mA to ± 20 mA, 0-1 V to 2-10 V, to ± 10 V
F534 Frequency Transducer
Model | Description |
---|---|
SINEAX F534 | Sineax AC Frequency Transducer, 10-1500 Hz, 10-690 VAC input |
SINEAX F 535 Frequency Difference Transducer
SINEAX Frequency Transducer for the conversion of the difference in frequency from two electrical systems requiring
synchronization into a direct current or voltage signal which is proportional to the measured value.
Measurement inputs for sinusoidal, square-wave or distorted nominal input voltages with dominant
fundamental wave
Housing for top-hat rail mounting.
Certifications: CSA, GL (Germanischer Lloyd)
Standard as marine version per Lloyds Register of Shipping
Measure ΔΦ Between 2 Synchronized Supplies
Sine, Rectangular or Distorted Wave Forms
Available as Measuring Source
Powered to 230 V 24-60 VAC/VDC or
85-230 VAC/VDC Powered
Input:10 V to 690 V, 10 to 1500 Hz
Output:0-1 mA to 0-20mA, 1-5 mA to 4-20 mA,
± 1 mA to ± 20 mA, 0-1 V to 2-10 V, to ± 10 V
Frequency Transducer
Model | Description |
---|---|
SINEAX F535 | Sineax Frequency % difference AC Transducer, 10-1500 Hz, two single phase |