Phone: 253-927-6186
 Email: sales@hotektech.com
Home > Transducers > Sinax Signal Isolator Amplifier

SINEAX TV 808 1-Channel Isolator Isolating Amplifier Unipolar Bipolar

The purpose of the 1 Channel isolating amplifier SINEAX TV 808 is to electrically insulate input and output signals, respectively to amplify and/or change the signal level or type (current or voltage) of the input signals.
Electric insulation between input, output (2.3 kV) and power supply (3.7 kV) / Prevents measurement errors due to potential leakage.
Flexibility provided by 36 different input and output combinations selected by simply positioning plug-in
jumpers / No influence on accuracy / Reduced stocking. Non-standard user-specific ranges available.
Input: 4-20 mA, 0-40 mA, ± 40 mA, 0-40 V, ± 40 V.
Output: 0-20 mA, 4-20 mA, ± 20 mA, 0-10 V, ± 10 V

 TV808 One channel isolating amplifier
Available in type of protection "Intrinsic safety" [EEx ia] IIC (see Data on explosion protection").
Provision for either snapping the isolating amplifier onto top-hat rails or securing it with screws to a wall or panel.
Housing only 17,5 mm (size S17 housing)
Low space requirement.
3.7kV Isolation Power Supply verses I/O,
2.3kV Isolation Input to Output
Fully Configurable Input and Output Settings
Zero and Span Adjustments
Intrinsically Safe Versions
Power Input: 24...60V AC/DC or 85...230V AC/DC

One Channel Signal isolator amplifier

Model  Description 
SINEAX TV808 1-Channel Isolator Isolating Amplifier

SINEAX TV 808 Dual Channel Isolator Isolating Amplifier Unipolar Bipolar

The purpose of the Dual Channel Isolating Amplifier SINEAX TV 808 is to electrically insulate input and output signals, respectively to amplify and/or change the signal level or type (current or voltage) of the input signals.
The amplifier fulfils all the important requirements and regulations concerning electromagnetic compatibility EMC and Safety (IEC 1010 resp. EN 61 010).
It was developed and is manufactured and tested in strict accordance with the quality assurance standard ISO 9001.
Input: 4-20 mA, 0-40 mA, ± 40 mA, 0-40 V, ± 40 V.
Output: 0-20 mA, 4-20 mA, ± 20 mA, 0-10 V, ± 10 V

 Sineax TV 808 Dual Channel Isolating Amplifier
The device has two channels and provides two independent isolating amplifiers in an extremely small space.
The user has a wide choice of input and output ranges and can set the desired one with the aid of soldered jumpers and potentiometers.
A version with one input and two outputs is available that enables two electrically insulated outputs to be obtained from a single input signal.
Dual Channel or Signal Splitter
3.7kV Isolation Power Supply verses I/O, 2.3kV Isolation
Input to Output
Zero and Span Adjustment for Each Channel

Signal isolator amplifier

Model  Description 
SINEAX TV808 Dual Channel Isolator Isolating Amplifier Unipolar Bipolar

SINEAX TV809 Programmable Isolating amplifier, 1 Channel

The Passive DC signal isolator SINEAX TI 816 serves to electrically insulate an analogue DC signal in the range 0…20 mA which depending on version is then converted to a current or voltage
signal (0…20 mA or 0…10 V).
It operates passively and does not require a separate power supply, but derives the little auxiliary energy it needs from the DC signal.
Its narrow casing is designed for mounting on different types of standard rails.
Input: 0-30 mV to 0-1000V, 0-20 µA to 0-100 mA.
Output: 0-20 mA to ± 20 mA, 20-4 mA, 0-10 V to ± 10 V, 10-0 V

Programmable Isolating amplifier.

A number of signal isolators can be mounted immediately next to each other and where there are many DC signals to be isolated can form a compact isolator block.

Loop Powered with V or mA outputs.
Only 0.5 " (12.5mm) Wide.

The SINEAX TI 816 signal isolator electrically isolates the analog 0 to 20 mA direct current signal, which, depending upon model, is converted to a current or voltage signal (0...20 mA or 0...10 V).

Programmable Isolating amplifier

Model  Description 
SINEAX TV809 Programmable Isolating amplifier, 1 Channel

SINEAX TV819 One Channel Isolating Amplifier Unipolar Bipolar

The Passive Signal isolator SINEAX TI 807 serves to electrically insulate the analogue DC signal in the range 0…20 mA which depending on version is then converted to a current or voltage signal (0…20 mA or  0…10 V).
It operates passively and does not require a separate power supply, but derives the little auxiliary energy it needs from the DC signal.
The series of isolators also includes "intrinsically safe" explosion proof versions with either an intrinsically safe input signal [EEx ib] IIC or intrinsically safe output signal [EEx ia] IIC.
Input: 0-60 mV to 0-1000V, 0-20 mA to ± 40 mA.
Output: 0-20 mA to ± 20 mA, 0-10 V to ± 10 V

 SINEAX TV819 One Channel Isolating Amplifier
They are thus suitable for use in connection with intrinsically safe equipment installed in the hazardous area.
The signal isolator is supplied in two different housings depending on the number of transmitter channels to be isolated: SINEAX TI 807-5 with one transmitter channel to be isolated in housing Type N17 and SINEAX TI 807-1 with two or three channels in housing Type S17.
Both types of housing are suitable for either rail or wall mounting.
Loop Powered with V or mA outputs.
Single and Multi-Channel Versions.

SINEAX TV819 One Channel Isolating Amplifier

Model  Description 
SINEAX TV 819  One Channel Isolating Amplifier Unipolar Bipolar
We accept
  • American Express
  • Master Card
  • VISA
  • Purchase Orders
Company
Hotek Technologies, Inc
tel: 253-927-6186
sales@hotektech.com
services@hotektech.com
info@hotektech.com