HD2114B.0 Barometer-Manometer-Thermometer with in-built barometric sensor (800…1100 mbar),
input for SICRAM module
PP471 to connect probes TP704 and TP705 series. Temperature measurement with Pt100 probe complete
with SICRAM module, measuring range -200°C +650°C. Storage of maximum, minimum, average value.
Functions: REL, HOLD and auto power off which can be disabled, IP 67
HD2114B.2 Barometer-Manometer-Thermometer data logger with in-built barometric sensor, input for SICRAM module PP471 to connect probes TP704 and TP705 series. Temperature measurement with Pt100 probe complete with SICRAM module, measuring range -200°C +650°C. Data logger which stores the maximum, minimum, average value and can store up to 36.000 couples of samples. RS232 C/ USB output for data transfer in real time to a PC or printer. Functions: REL, HOLD and auto power off which can be disabled, IP 67 protection degree.
Manometer - Barometer
|HD 2114B.0||Barometer-Manometer - barometric 800-1100 mbar, sensor|
|HD 2114B.2||Barometer-Manometer with barometric sensor. Data Logger.|
These are portable instruments with a large LCD display. They measure absolute, relative and differential
pressure, as well as temperature.
Pressure is measured using an internal module which is differential with respect to the atmosphere with fixed full scale.
With the PP471 module acting as an interface, the instrument can use all the TP704 and TP705 series probes to perform the measurements.
The HD2114B.0 and HD2114B.2 internal module measures the barometric pressure. The temperature is detected using immersion, penetration, contact or air probes, with SICRAM module or
direct 4 wire probes. The sensor can be a Pt100, Pt1000 or Ni1000. The temperature probes are fitted with a SICRAM module, with the factory calibration settings already being
logged inside. On being turned on the instrument automatically detects these settings.
The HD2114B.2 instruments are data loggers. They memorize up to 36,000 samples which can be transferred from the instrument connected to a PC via the multi-standard RS232C serial port and USB 2.0.
The storing interval, printing, and baud rate can be configured using the menu.
They are also fitted with an RS232C serial port and can transfer the acquired measurements to a PC or to a portable printer in real time.
INSTRUMENT TECHNICAL CHARACTERISTICS
Dimensions (Length x Width x Height) 185x90x40mm
Weight 470g (complete with batteries)
Materials ABS, rubber
Display 2x41⁄2 digits plus symbols
Visible area: 52x42mm
Operating temperature -5° to 50°C
Storage temperature -25° to 65°C
Working relative humidity 0 - 90%RH without condensation
Protection degree IP67
Power Batteries 4 1.5V type AA batteries
Autonomy 200 hours with 1800mAh alkaline batteries
Power absorbed with instrument off 20μA
Mains - model HD2114P.2 Output mains adapter 9Vdc / 250mA
Units °C - °F - Pa - hPa - kPa - mbar - bar - atm - mmHg - mmH2O - kgf/cm2 - PSI - inchHg
HD2114B.0: The kit is composed of the HD2114B.0 with 600�1100mbar range barometric sensor, 4 1.5V alkaline batteries, operating manual, case. Other probes must be ordered separately.
HD2114B.2: The kit is composed of the HD2114B.2 datalogger with 600�1100mbar range barometric sensor, connection cable
HD2101/USB, 4 1.5V alkaline batteries, operating manual, case and DeltaLog9 software. Other probes must be ordered separately.
HD2110CSNM: 8-pole connection cable MiniDin - Sub D 9-pole female for RS232C.
HD2101/USB: Connection cable USB 2.0 connector type A - 8-pole MiniDin. DeltaLog9: Software for download and management of the data on PC using Windows 98 to XP operating systems.
AF209.60: Stabilized power supply at 230Vac/9Vdc-300mA mains voltage.
Sprint-BT: On request, portable, serial input, 24 column thermal printer, 58mm paper width.