Phone: 253-927-6186
 Email: sales@hotektech.com
Home > Instruments > Manometer-Pressure Meter > HD2164.0 Manometer

HD2164.0 Micro Manometer Thermometer with 2000mbar built-in sensor, input for SICRAM module PP471 to connect probes TP704 and TP705 series. Temperature measurement with Pt100 probe complete with SICRAM module, measuring range -200°C +650°C. Storage of maximum, minimum, average value. Functions: REL, HOLD and auto power off which can be disabled, IP 67 protection degree.
HD2164.2 Micro Manometer Data logger with 2000mbar built-in sensor, input for SICRAM module PP471 to connect probes TP704 and TP705 series. Temperature measurement with Pt100 probe complete with SICRAM module, measuring range -200°C +650°C. Datalogger which stores maximum, minimum, average value and can store up to 36.000 couples of samples. RS232 C/ USB output for data transfer in real time to a PC or printer. Functions: REL, HOLD and auto power off which can be disabled, IP 67 protection degree.

Manometer - Pressure Data logger

Model  Description 
HD 2164.0  Micro manometer with 2000 mbar sensor
HD 2164.2  Manometer with 2000mbar sensor. Data Logger.

The HD2164.2 instruments are data loggers. They memorize up to 36,000 samples which
can be transferred from the instrument connected to a PC via the multi-standard RS232C serial port and
USB 2.0. The storing interval, printing, and baud rate can be configured using the menu.
They are also fitted with an RS232C serial port and can transfer the acquired measurements to a PC or to
a portable printer in real time.
The Max, Min and Avg function calculates the maximum, minimum or average values.
The Peak function can be activated with external probes connected to the module PP471 and detects the
presence of pressure peaks.
Other functions include: the relative measurement REL, the HOLD function, and the automatic turning off
which can also be disabled.

INSTRUMENT TECHNICAL CHARACTERISTICS

Instrument
Dimensions (Length x Width x Height) 185x90x40mm
Weight 470g (complete with batteries)
Materials ABS, rubber
Display 2x41⁄2 digits plus symbols
Visible area: 52x42mm
Operating conditions
Operating temperature -5° to 50°C
Storage temperature -25° to 65°C
Working relative humidity 0 - 90%RH without condensation
Protection degree IP67
Power Batteries 4 1.5V type AA batteries
Autonomy 200 hours with 1800mAh alkaline batteries
Power absorbed with instrument off 20μA
Mains - model HD2114P.2 Output mains adapter 9Vdc / 250mA
Units °C - °F - Pa - mbar - mmH2O - PSI - m/s - km/h - ft/m - mph - knot - l/s - m3/h - cfm

ORDER CODES

HD2164.0: The kit is composed of the HD2164.0 with built-in 2000mbar full scale probe, 4 1.5V alkaline batteries, operating manual, case. Other probes must be ordered separately.
HD2164.2: The kit is composed of the HD2164.2 datalogger with built-in 2000mbar full scale probe, connection cable HD2101/USB, 4 1.5V alkaline batteries, operating manual, case and DeltaLog9 software. Other probes must be ordered separately.
HD2110CSNM: 8-pole connection cable MiniDin - Sub D 9-pole female for RS232C.
HD2101/USB: Connection cable USB 2.0 connector type A - 8-pole MiniDin.
DeltaLog9: Software for download and management of the data on PC using Windows 98 to XP
operating systems.
AF209.60: Stabilized power supply at 230Vac/9Vdc-300mA mains voltage.
S'print-BT: On request, portable, serial input, 24 column thermal printer, 58mm paper width.
PRESSURE MEASUREMENT PROBES
PP471: SICRAM interface module between instrument and TP704 and TP705 series Delta Ohm probes.
Cable length 2 metres. The list of pressure probes is outlined in the PP471 module technical data table.
TEMPERATURE PROBES COMPLETE WITH SICRAM MODULE
TP472I: Pt100 sensor immersion probe. Stem Φ 3 mm, length 300 mm. Cable length 2 metres.
TP472I.0: Pt100 sensor immersion probe. Stem Φ 3 mm, length 230 mm. Cable length 2 metres.
TP473P.0: Pt100 sensor penetration probe. Stem Φ 4mm, length 150 mm. Cable length 2 metres.
TP474C.0: Pt100 sensor contact probe. Stem Φ 4mm, length 230mm, contact surface Φ 5mm.
Cable length 2 metres.
TP475A.0: Pt100 sensor air probe. Stem Φ 4mm, length 230mm. Cable length 2 metres.
TP472I.5: Pt100 sensor immersion probe. Stem Φ 6mm, length 500 mm. Cable length 2 metres.
TP472I.10: Pt100 sensor immersion probe. Stem Φ 6mm, length 1,000mm. Cable length 2 metres.
TEMPERATURE PROBES WITHOUT SICRAM MODULE
TP47.100: Direct 4 wire Pt100 sensor immersion probe. Probe's stem Φ 3mm, length 230mm. 4 wire
connection cable with connector, length 2 metres.
TP47.1000: Pt1000 sensor immersion probe. Probes stem Φ 3mm, length 230mm. 2 wire connection
cable with connector, length 2 metres.
TP47: Only connector for probe connection: direct 4 wire Pt100, 2 wire Pt1000 and Ni1000.

We accept

  • American Express
  • Master Card
  • VISA
  • Purchase Orders

Company

  • Hotek Technologies, Inc
  • tel: 253-927-6186
  • sales@hotektech.com
  • services@hotektech.com
  • info@hotektech.com