Phone: 253-927-6186
 Email: sales@hotektech.com

HD2178.1 Thermometer with two inputs, the first for Pt100 sensor for input of probes equipped with SICRAM module, the second input for thermocouple type K, J, T, E, N, large display.
Measuring range -200,0°C +650,0 °C for Pt100, -200°C +1370°C for thermocouple.
Storage of maximum, minimum, average value, RS232 C output for data transfer in real time to a PC or
printer. Functions: REL, HOLD and auto power off which can be disabled, IP 67 protection degree.
HD2178.2 Thermometer with two inputs, the first for Pt100 sensor for input of probes equipped with SICRAM module, and the second input for thermocouple type K, J, T, E, N, large display.
Measuring range -200,0°C +650,0°C. Datalogger which stores maximum, minimum, average value,
and can stored up to 36.000 couples of samples. RS232 C/USB output for data transfer in real time to a PC or printer. Functions: REL, HOLD and auto power off which can be disabled, IP 67 protection degree.

Digital Thermometer Data Logger.

Model  Description 
HD2178.1  Digital Thermometer Pt100 and thermocouple inputs
HD2178.2  Digital Thermometer two probes. Data Logger Thermometer.

The HD2178.1 and HD2178.2 measure the temperature using immersion, penetration air or contact
probes with RTD or thermocouple sensor.
A 3 or 4 wire Pt100 sensor or a 2 wire Pt100 sensor can be connected to the input B, while a thermocouple of type K, J, T, E, N to the input A. The probes for input B, 8 poli DIN45326 connector, are equipped with automatic detection module with the factory calibration settings already being memorized inside.

A miniature polarized connector for thermocouple is provided for input A.
The instrument HD2178.2 is a datalogger which stores up to 80,000 samples.
These data can be transferred to a PC via the multi-standard RS232C serial port and USB 2.0.
The storing interval, printing, and baud rate can be configured using the menu.
The models HD2178.1 and HD2178.2 are fitted with an RS232C serial port and can transfer the
acquired measurements in real time to a PC or to a portable printer.

INSTRUMENT TECHNICAL CHARACTERISTICS
Instrument Dimensions (Length x Width x Height) 185x90x40mm Weight 470g (complete with batteries)
Materials ABS, rubber.
Display 2x41⁄2 digits plus symbols.
Visible area: 52x42mm
Operating conditions
Operating temperature -5°C - +50°C Warehouse temperature -25°C - +65°C
Working relative humidity 0 - 90%RH without condensation
Protection degree IP67
Power Batteries 4 1.5V type AA batteries Autonomy 200 hours with 1800mAh alkaline batteries
Power absorbed with instrument off 20μA Mains
Output mains adapter 9Vdc / 250mA
Measuring unit °C - °F
The accuracy only refers to the instrument.
Error due to the thermocouple or to the cold junction reference sensor is not included.
Temperature drift @ 20°C 0.02%/°C Drift after 1 year 0.1°C/year

ORDER CODES
HD2178.1: The kit is composed of the instrument HD2178.1, connection cable for serial output HD2110CSNM, 4 1.5V alkaline batteries, operating manual, case and DeltaLog9 software. The probes must be ordered separately.
HD2178.2: The kit is composed of the HD2108.2 datalogger, connection cable HD2101/USB, 4 1.5V alkaline batteries, operating manual, case and DeltaLog9 software. The probes must be ordered separately.
HD2110CSNM: 8-pole connection cable MiniDin - Sub D 9-pole female for RS232C.
HD2101/USB: Connection cable USB 2.0 connector type A - 8-pole MiniDin.
DeltaLog9: Software for download and management of the data on PC using Windows 98 to XP operating systems.
AF209.60: Stabilized power supply at 230Vac/9Vdc-300mA mains voltage.
Sprint-BT: On request, portable, serial input, 24 column thermal printer, 58mm paper width.
Probes complete with SICRAM module
TP472I: Immersion probe, sensor Pt100. Stem Φ 3 mm, length 300 mm. Cable length 2 meters.
TP472I.0: Immersion probe, sensor Pt100. Stem Φ 3 mm, length 230 mm. Cable length 2 meters.
TP473P.0: Penetration probe, sensor Pt100. Stem Φ 4mm, length 150 mm. Cable length 2 meters.
TP474C.0: Contact probe, sensor Pt100. Stem Φ 4mm, length 230mm, contact surface - 5mm.
Cable length 2 meters.
TP475A.0: Air probe, sensor Pt100. Stem Φ 4mm, length 230mm. Cable length 2 meters.
TP472I.5: Immersion probe, sensor Pt100. Stem Φ 6mm, length 500 mm. Cable length 2 meters.
TP472I.10: Immersion probe, sensor Pt100. Stem Φ 6mm, length 1,000mm. Cable length 2 meters.
TP49A: Immersion probe, sensor Pt100. Stem Φ 2.7mm, length 150mm. Cable length 2 meters.
Aluminum handle.

We accept

  • American Express
  • Master Card
  • VISA
  • Purchase Orders

Company

  • Hotek Technologies, Inc
  • tel: 253-927-6186
  • sales@hotektech.com
  • services@hotektech.com
  • info@hotektech.com