HD 786 TR1 Configurable temperature transmitter with output 4
Measuring range -50°C - +200°C, minimum range 25°C. Standard configuration 0..100°C.
Container 65x58x35mm. Wall mounting, Complete with Pt100 probe Φ14 L=130mm.
Linear temperature transmitter 4 - 20 mA for Pt 100 Platinum sensors, 100 ohm at 0°C.
The temperature transmitters in the series HD 786 T, T1 and T5 are suitable for fitting directly on the wall.
The system for transmitting analog signals at 4 - 20 mA is widely used in industry as it offers the following advantages:
Linear temperature transmitter
|HD 786 TR1||Configurable temperature transmitter with output 4...20mA|
Only two wires are used to transmit both the power supply and the signal: low wiring cost.
Voltage drops on the connection line do not cause errors because the signal transmitted is current and not
voltage: high measurement precision even with small wire sections.
High immunity to disturbances in both common and differential mode: the signal may be transmitted even at
long distances without errors (up to 300 m).
Compatibility with the 4 - 20 mA regulators commonly used in controlling industrial processes.
The device is particularly suitable for industrial applications. In some applications it may be convenient to
screen the cables or lay them in a protective tube separate from the power electronics.