METRACLIP 63 Milliampere Current Clamp on meter.
The milliampere clamp is very well suited for the measurement of small direct and alternating
currents as of a value of 1 mA.
It’s equipped with a power saving circuit, a data interface, indication of exceeded measuring ranges and a
flexible current sensor, and can be used even under very unfavorable mechanical conditions.
Current Clamp Meter.
|METRACLIP 63||METRACLIP 63 Milliampere Current Clamp on meter.|
- DC 100 mA / 1000 mA
- AC 100 mA / 1000 mA / 10 A
Switching back and forth between DC and AC measurements.
Zero balancing for DC measurements.
Measured value storage (DATA HOLD).
Power saving circuit.
Current clamp with 1.2 meter cable length.
Clip opening 5 mm Ø.
Connector sockets for data logger (max. output: 100 mV DC)