Cable Fault Locator, Calibrator Actuator, Calibrators, Current Calibrator, Frequency Calibrator, Loop Calibrator, Voltage Calibrator, Calibrators, Multifunction, Pressure Calibrator, Temperature Calibrator, pH Calibrators, Sound Calibrators, Capacitance Standard, Capacitor, Calibrators, Decade, Calibrator, Clamp On Meter, Capacitance Bridge, Conductivity, Coil Turns Tester, CO, CO2 Analyzer, Multifunction Calibrators. Combustion Analyzers.

C

CABLE FAULT LOCATOR

5762 High Resistance Cable Fault locator.
5762N High Resistance Cable Fault locator.

CableCop 300   Cable Detection system for dead and life lines.

5902 Long Haul Submarine Cable Test Set
5930, 5931 Submarine Cable Survey System 
5910 Portable Short haul Submarine Cable Test Set
5910R Rack Mount Short haul Submarine Cable Test Set
5915 Electroding Generator
5916 Electroding Detector
5917 Beach Probe
5918 Battery Powered Portable Electroding Detector
5901C Submarine Cable DC Test Set
5941 Cable Termination Unit
5906A Standard for the calibration of Model 5902 Submarine Cable Test Set
5906B Standard for the calibration of Model 5902 Submarine Cable Test Set

CALIBRATORS ACTUATORS

METRATest 36AS-i Actuator Sensor Interface Tester and Programmer.

CALIBRATORS CURRENT

IVC222HPII Voltage Current Calibrator. General purpose current and voltage source.
LC100 Process Calibrator. Accuracy of 0.015% of reading, with 0.001 mA resolution.
LCC421 Economy Series Voltage Current Calibrator
MS420 Mini-Source Portable Calibrator 
PSC4000 Process Signal Calibrator. Full function voltage and current calibrator.

MasterCal990 Precision Multi-function documenting Calibrator and HART configurator communicator.
MC1000 Multifunction Calibrator. Thermocouples, RTD's, Ohms, Voltage, current, frequency, pressure
MC1200 Multi-function Dual Display Calibrator. Excellent accuracy ±0.4°C T/C ±0.3°C RTD
DMC1400 Multifunction Documenting Calibrator. Excellent accuracy. HART compatibility.
PTC8001 Universal Temperature Calibrator. Precision Temperature Calibrator. Thermocouples RTDs
M2000A Bench Calibrator, Lab Standard. Voltage and Current Calibrator.
3001 Laboratory Bench Standard Voltage Current Calibrator. Source or measure

UC-504 Universal Calibrator. Measures and generates mA, mV, Volts, Ohms, RTD, TC and Hz.
LC-505 Loop Calibrator. Measures and generates standard signals for current and voltage loops.

VI-700 Voltage Current Source. Manual and programmable voltage current source.

CALIBRATORS DOCUMENTING

DMC1400 Multifunction Documenting Calibrator. Excellent accuracy. HART compatibility.
MasterCal990 Precision Multi-function documenting Calibrator and HART configurator communicator.

CALIBRATORS FREQUENCY

MasterCal990 Precision Multi-function documenting Calibrator and HART configurator communicator.
MC1000 Multifunction Calibrator. Thermocouples, RTD's, Ohms, Voltage, current, frequency, pressure
MC1200 Multi-function Dual Display Calibrator. Excellent accuracy ±0.4°C T/C ±0.3°C RTD
DMC1400 Multifunction Documenting Calibrator. Excellent accuracy. HART compatibility.

UC-504 Universal Calibrator. Measures and generates mA, mV, Volts, Ohms, RTD, TC and Hz.

CALIBRATORS HART

MasterCal990 Precision Multi-function documenting Calibrator and HART configurator communicator.
MC1200 Multi-function Dual Display Calibrator. Excellent accuracy ±0.4°C T/C ±0.3°C RTD
DMC1400 Multifunction Documenting Calibrator. Excellent accuracy. HART compatibility.

CALIBRATORS HUMIDITY

Huminator Humidity probes reference. Humidity Temperature Calibrator.
2000 Humidity Temperature Calibrator. Humidity range 8% to 95% RH.

CALIBRATORS INSULATION TESTER

4720 Resistance Decade. High voltage, High Resistance Decade Box Voltages up to 5000V. 
4721 High voltage resistance decade. Single, High Resistance Decade Box.

HRRS-5kV Resistance Decade. Accuracy .01%. One to seven decades up to 10 Tohm.
ISO-KALIBRATOR 1   Calibration Adapter for Insulation and Resistance Measuring Instruments

CALIBRATORS LOOP

MasterCal990 Precision Multi-function documenting Calibrator and HART configurator communicator.
MC1000 Multifunction Calibrator. Thermocouples, RTD's, Ohms, Voltage, current, frequency, pressure
MC1200 Multi-function Dual Display Calibrator. Excellent accuracy ±0.4°C T/C ±0.3°C RTD
DMC1400 Multifunction Documenting Calibrator. Excellent accuracy. HART compatibility.
PTC8001 Universal Temperature Calibrator. Precision Temperature Calibrator. Thermocouples RTDs
M2000A Bench Calibrator, Lab Standard. Voltage and Current Calibrator.
3001 Laboratory Bench Standard Voltage Current Calibrator. Source or measure

IVC222HPII Voltage Current Calibrator. General purpose current and voltage source.
LC100 Process Calibrator. Accuracy of 0.015% of reading, with 0.001 mA resolution.
LCC421 Economy Series Voltage Current Calibrator
MS420 Mini-Source Portable Calibrator 
PSC4000 Process Signal Calibrator. Full function voltage and current calibrator.

UC-504 Universal Calibrator. Measures and generates mA, mV, Volts, Ohms, RTD, TC and Hz.
LC-505 Loop Calibrator. Measures and generates standard signals for current and voltage loops.

CALIBRATORS MULTIFUNCTION

MasterCal990 Precision Multi-function documenting Calibrator and HART configurator communicator.
MC1000 Multifunction Calibrator. Thermocouples, RTD's, Ohms, Voltage, current, frequency, pressure
MC1200 Multi-function Dual Display Calibrator. Excellent accuracy ±0.4°C T/C ±0.3°C RTD
DMC1400 Multifunction Documenting Calibrator. Excellent accuracy. HART compatibility.
M2000A Bench Calibrator, Lab Standard. Voltage and Current Calibrator.
3001 Laboratory Bench Standard Voltage Current Calibrator. Source or measure

UC-504 Universal Calibrator. Measures and generates mA, mV, Volts, Ohms, RTD, TC and Hz.

CALIBRATORS pH

CSP-101 pH Simulator. pH Waterproof portable simulator. Simulates: 4.00 pH, 7.00 pH and 10.00 pH.
CSP-501 pH Simulator. Laboratory pH, mV and temperature simulator, high accuracy, simulates pH
HD 9609  pH, mV Simulator. Calibrator for checking and calibrating pH and mV measuring meters.

CALIBRATORS PRESSURE

M3830 Deadweight Tester. Pressure Range 500 - 30000 psi. Accuracy: 0.015% or 0.020% of reading.
M3840 Deadweight Tester. Pressure Range 500 - 40000 psi. Accuracy: 0.015% or 0.020% of reading.
M3860 Deadweight Tester. Pressure Range 500 - 60000 psi. Accuracy: 0.015% or 0.020% of reading.
P3000 Hydraulic Deadweight Tester. Ranges 1 to 1400 bar, 10 to 20000 psi accuracy to ±0.015%.
P3000 Low Pressure Pneumatic Deadweight Tester. Pressure / Vacuum ranges.

P5511  Comparison Pump Vacuum and Pressure 24 inHg / 800 mbar
P5512  Comparison Pump Pneumatic 300 psi / 20 bar
P5513  Comparison Pump Pneumatic 3500 psi /  220 bar
P5514  Comparison Pump Hydraulic 10 000 psi / 700 bar
P5514V  Comparison Pump Hydraulic, Viton Seals 10 000 psi / 700 bar
P5514EP  Comparison Pump Hydraulic, Skydrol 10 000 psi / 700 bar
P5515  Comparison Pump Hydraulic 20 000 psi / 1400 bar
P5515V  Comparison Pump Hydraulic, Viton Seals 20 000 psi / 1400 bar
P5515EP  Comparison Pump Hydraulic, Skydrol 20 000 psi / 1400 bar
M3800C Comparison Pump  Hydraulic 60 000 psi / 4200 bar

Portable Calibration Kits. Pneumatic, Hydraulic.
Pneumatic Calibration Kits. Range -1 to 25 bar, -14.5 to 360 psi
Hydraulic Calibration Kits. Range 0 to 1000 bar, 15 000 psi
Portable Calibration System fully portable test laboratory.

MECP100 Pneumatic Pressure Vacuum Pump - 25 inHg to 100 psi
MECP500 Pneumatic Pressure Vacuum Pump  -29 inHg to 600 psi
MECP10K Hydraulic Pressure Pump 0 to 10000 psi
TP1-40  Portable Handheld Pneumatic Pump. Vacuum Pressure.  -28" Hg to 600 psi.
HTP1 Portable Handheld Pump. Hydraulic High Pressure Pump. Range up to 1000 bar, 14 500 psi. 
LTP1 Pressure Vacuum Pump. Range  30 psi pressure or -850 mbar, 25 in Hg vacuum.

PC6-AV Pressure Calibrator - Aerospace Version
PC6-PRO Pressure Portable Calibrator.
PC6-PRO-Bench Bench Panel Pressure Calibrator.
PC10 Pneumatic High Pressure Pneumatic Calibrator. Pressure range up to 3000 psi.

CaliBox Calibrator, Maintenance, control and calibration of low differential pressure.

T-140 Portable Pressure Calibrator. Ranges ±10" H2O, ±200" H2O, and 30, 100, 300, and 3,000 PSI.
BetaGauge 301 Single Sensor Pressure Calibrator. Ranges 1, 5, 30, 100 and 300 PSI.
BetaGauge 311 Single Sensor Pressure Calibrator. 27 Ranges in Gauge, Vacuum, Absolute.
BetaGauge 320 Portable Pressure Calibrator. 27 Ranges. Gauge, Vacuum, Absolute and Differential.
BetaGauge 321 Dual Sensor Pressure Calibrator. 27 Ranges Gauge, Vacuum, Absolute Differential
BetaGauge II Pressure Documenting Calibrator. Pressure accuracy of 0.025% full scale
BetaGauge PI  Digital Pressure Gauge Available in eight standard ranges, ±0.05% F. S.;
BetaGauge PIR  Digital Pressure Gauge with RS232 port and internal Temperature Sensor. 
DPC-30 Pneumatic Calibration System. Highly accurate, digital calibrator for pneumatic field

MC1000 Multifunction Calibrator. Excellent accuracy ±0.4°C T/C ±0.3°C RTD and 0.015% electrical.
MC1200 Multifunction Calibrator. Excellent accuracy ±0.4°C T/C ±0.3°C RTD and 0.015% electrical.
DMC1400 Multifunction Documenting Calibrator. Excellent accuracy. HART compatibility.

PC-507 Pressure Calibrator. Measures and generates mA, mV, Volts, Ohms, RTD, TC and Hz.

Digital Pressure Gauges Pressure Vacuum Digital Gauges

CALIBRATORS RTD

MasterCal990 Precision Multi-function documenting Calibrator and HART configurator communicator.
MC1000 Multifunction Calibrator. Thermocouples, RTD's, Ohms, Voltage, current, frequency, pressure
MC1200 Multi-function Dual Display Calibrator. Excellent accuracy ±0.4°C T/C ±0.3°C RTD
DMC1400 Multifunction Documenting Calibrator. Excellent accuracy. HART compatibility.
M2000A Bench Calibrator, Lab Standard. Voltage and Current Calibrator.
3001 Laboratory Bench Standard Voltage Current Calibrator. Source or measure
PTC8001 Universal Temperature Calibrator. Precision Temperature Calibrator. Thermocouples RTDs

UC-504 Universal Calibrator. Measures and generates mA, mV, Volts, Ohms, RTD, TC and Hz.
TC-502 Temperature Calibrator. Measures and generates mV, T/C, Ohms and RTD signals, mA.

HD2047 Pt100 Simulator. Instrument designed to test and calibrate instruments with Pt100 input

RTD Resistance Decade. RTD Resistance Temperature Detector simulation.
PZS Programmable Resistance Decade. Resistance 1 milliohm to 100 MOhm.

Blackbody Temperature Sources
Dry Block Temperature Calibrators
Furnaces Temperature Calibrators
Greybody Temperature Sources
Liquid Baths Temperature Calibration
Surface Temperature Sensor Temperature Calibrator
Thermometry Standards

CALIBRATORS THERMOCOUPLE

MasterCal990 Precision Multi-function documenting Calibrator and HART configurator communicator.
MC1000 Multifunction Calibrator. Thermocouples, RTDs, Ohms, Voltage, current, frequency, pressure
MC1200 Multi-function Dual Display Calibrator. Excellent accuracy ±0.4°C T/C ±0.3°C RTD
DMC1400 Multifunction Documenting Calibrator. Excellent accuracy. HART compatibility.
M2000A Bench Calibrator, Lab Standard. Voltage and Current Calibrator.
3001 Laboratory Bench Standard Voltage Current Calibrator. Source or measure
PTC8001 Universal Temperature Calibrator. Precision Temperature Calibrator. Thermocouples RTDs
LTC920 Economy Series Thermocouple Calibrator

TC100 Thermocouple Calibrator. The TC-100's accuracy of ±0.3°C for Type J T/Cs includes all errors,
T/C Cable Kit High Accuracy Temperature Calibrator Cable Kit.  calibrator, temperature
TP-KIT Probe Kit A temperature probes for use with all temperature meters and calibrators. 

UC-504 Universal Calibrator. Measures and generates mA, mV, Volts, Ohms, RTD, TC and Hz.
TC-502 Temperature Calibrator. Measures and generates mV, T/C, Ohms and RTD signals, mA.

Blackbody Temperature Sources
Dry Block Temperature Calibrators
Furnaces Temperature Calibrators
Greybody Temperature Sources
Liquid Baths Temperature Calibration
Surface Temperature Sensor Temperature Calibrator
Thermometry Standards

CALIBRATORS SOUND

HD9101 Sound Level Calibrator. Class 1 calibrator for sound level meters
HD9102 Sound Level Calibrator. Sound level generator for calibrating sound level meters.
1562A Sound Level Calibrator. Noise level generator.
LSC941 Sound Level Meters Calibrator
LSC942 Sound Level Meters Calibrator

CALIBRATORS TEMPERATURE

MasterCal990 Precision Multi-function documenting Calibrator and HART configurator communicator.
MC1000 Multifunction Calibrator. Thermocouples, RTDs, Ohms, Voltage, current, frequency, pressure
MC1200 Multi-function Dual Display Calibrator. Excellent accuracy ±0.4°C T/C ±0.3°C RTD
DMC1400 Multifunction Documenting Calibrator. Excellent accuracy. HART compatibility.
M2000A Bench Calibrator, Lab Standard. Voltage and Current Calibrator.
3001 Laboratory Bench Standard Voltage Current Calibrator. Source or measure
PTC8001 Universal Temperature Calibrator. Precision Temperature Calibrator. Thermocouples RTDs
LTC920 Economy Series Thermocouple Calibrator

HD2047 Pt100 Simulator. Instrument designed to test and calibrate instruments with Pt100 input

RTD Resistance Decade. RTD Resistance Temperature Detector simulation.
PZS Programmable Resistance Decade. Resistance 1 milliohm to 100 MOhm.

TC100 Thermocouple Calibrator. The TC-100's accuracy of ±0.3°C for Type J T/Cs includes all errors,
T/C Cable Kit High Accuracy Temperature Calibrator Cable Kit.  calibrator, temperature
TP-KIT Probe Kit A temperature probes for use with all temperature meters and calibrators. 

UC-504 Universal Calibrator. Measures and generates mA, mV, Volts, Ohms, RTD, TC and Hz.
TC-502 Temperature Calibrator. Measures and generates mV, T/C, Ohms and RTD signals, mA.

Blackbody Temperature Sources
Dry Block Temperature Calibrators
Furnaces Temperature Calibrators
Greybody Temperature Sources
Liquid Baths Temperature Calibration
Surface Temperature Sensor Temperature Calibrator
Thermometry Standards

CALIBRATORS VOLTAGE

MasterCal990 Precision Multi-function documenting Calibrator and HART configurator communicator.
MC1000 Multifunction Calibrator. Thermocouples, RTD's, Ohms, Voltage, current, frequency, pressure
MC1200 Multi-function Dual Display Calibrator. Excellent accuracy ±0.4°C T/C ±0.3°C RTD
DMC1400 Multifunction Documenting Calibrator. Excellent accuracy. HART compatibility.
PTC8001 Universal Temperature Calibrator. Precision Temperature Calibrator. Thermocouples RTDs
M2000A Bench Calibrator, Lab Standard. Voltage and Current Calibrator.
3001 Laboratory Bench Standard Voltage Current Calibrator. Source or measure

IVC222HPII Voltage Current Calibrator. General purpose current and voltage source.
LC100 Process Calibrator. Accuracy of 0.015% of reading, with 0.001 mA resolution.
LCC421 Economy Series Voltage Current Calibrator
PSC4000 Process Signal Calibrator. Full function voltage and current calibrator.

UC-504 Universal Calibrator. Measures and generates mA, mV, Volts, Ohms, RTD, TC and Hz.
LC-505 Loop Calibrator. Measures and generates standard signals for current and voltage loops.

CANDELA LIGHT MEASUREMENT

MAVOLUX 5032C Digital Luxmeter Illuminance Footcandle Meter. Resolution fc 0.01.
MAVOLUX 5032B Digital Luxmeter Illuminance Footcandle Meter.  Resolution 0.001.
MAVO MONITOR Luminance Meter. Digital precision instrument for measuring luminance.
MAVO-SPOT Luminance Meter. The MAVO-SPOT attached to the MAVO-MONITOR

HD2102.1 Photo Radiometer. Illuminance, Luminance, PAR, Irradiance measurement.
HD2102.2 Photo Radiometer Data Logger. Illuminance, Luminance, PAR, Irradiance measurement.
HD2302.0 Photo Radiometer. Illuminance, Luminance, PAR, Irradiance measurement.
HD2302VP474 Photo Radiometer. A pyranometer can be connected.

DO9721 Photo Radiometer Thermometer Data Logger. Illuminance, radiance, luminance. 

CAPACITANCE CAPACITOR STANDARDS DECADES

SC Standard Capacitor. Capacitance Standard wide range of values 1 pF to 2000 microF
SC1000 Primary Standard Capacitor.
PZS Capacitance Decade. Programmable Capacitance Decade.
C-box CS Capacitance Substituter. Available from 1 pF to 999.9999 µF, Accuracy .01% to 1%
1409 Capacitance Standard. Capacitor Standard range 0.001 uF to 1000 uF. ±0.01%.
1412 Capacitance Decade. Capacitor decade range 50 pF to > 1 microF.
1413 Capacitance Decade. Six decades provide a range of 0 to 1.11111 microF.
1417 Capacitance Decade. Four Terminal Capacitance Standard.
1422 Capacitor Variable. Air Capacitance. AC bridge measurements.
1404 Standard Capacitor. Standard Capacitance 10, 100 and 1000 pF.
HACS-Z  Capacitor Decade Box. Capacitance from 1 pF to 10,000 microF.

CAPACITANCE BRIDGE

1620-A Capacitance Bridge with oscillator and null detectors for measurement at 11 frequencies.
1616 Capacitance Bridge. Precision capacitance measuring system.
1621 Capacitance Measuring Assembly.

DB210 Bridge. Capacitance, Resistance Inductance bridge. 100kHz, 10kHz, 1kHz, 100Hz 120 Hz. 
DB230 LCR Component Capacitor Tester. Designed for high accuracy testing of capacitors.
DB231 LCR Component Tester Bridge. Designed for manual and automatic high accuracy test.
DB232 LCR Component Tester. Designed for high accuracy testing of capacitors on production lines.
DB233 LCR Capacitor Component Tester. Designed for manual and automatic high accuracy test.
DB234 LCR Component Tester Bridge. Designed for high accuracy testing of capacitors. 
DB236 Capacitor Component Tester. Aluminum Tantalum Capacitors Test Bridge. 
CT10R LCR Bridge Component Tester. Fast and accurate LCR-Bridge. 

LCR-500 LCR Meter. Economical Digital LCR Meter.

CAPACITANCE MEASUREMENT

1620-A Capacitance Bridge with oscillator and null detectors for measurement at 11 frequencies.
1616 Capacitance Bridge. Precision capacitance measuring system.
1621 Capacitance Measuring Assembly.

DB210 Bridge. Capacitance, Resistance Inductance bridge. 100kHz, 10kHz, 1kHz, 100Hz 120 Hz. 
DB230 LCR Component Capacitor Tester. Designed for high accuracy testing of capacitors.
DB231 LCR Component Tester Bridge. Designed for manual and automatic high accuracy test.
DB232 LCR Component Tester. Designed for high accuracy testing of capacitors on production lines.
DB233 LCR Capacitor Component Tester. Designed for manual and automatic high accuracy test.
DB234 LCR Component Tester Bridge. Designed for high accuracy testing of capacitors. 
DB236 Capacitor Component Tester. Aluminum Tantalum Capacitors Test Bridge. 
CT10R LCR Bridge Component Tester. Fast and accurate LCR-Bridge. 

LCR-500 LCR Meter. Economical Digital LCR Meter.

Multimeters 

CAR BATTERY ANALYZER

23DC DC Battery Source Tester simultaneously measures battery voltage and internal resistance. 
Stationary Batteries Tester-Data storage, RS-232
Car Batteries Tester-Ub Car Battery Tester. 30/120 Volt
DC27 DC AC Battery UPS Load Units. Load Banks. 50 to 400 Hz Single and 3 phase loads. 
Software-Battery management.

CELL FIXED POINT

Oceanus 6 Dry Block Calibrator POTTS or Automated Fixed Points 10" deep for long sensors.
Medusa 510 Fixed-Point Cell and Dry Block Calibrator. Temperature range  +30°C to 250°C
Medusa 511 Fixed-Point Cell and Dry Block Calibrator. Temperature range  +50°C to 700°C
ITL-M-17401 Fixed Point Cell Primary Laboratory Quartz Fixed Point Cells Gallium 29.7646°C
ITL-M-17668 Fixed Point Cell Primary Laboratory Quartz Fixed Point Cells Indium 156.5985°C
ITL-M-17669 Fixed Point Cell Primary Laboratory Quartz Fixed Point Cells Tin 231.928°C
ITL-M-17670 Fixed Point Cell Primary Laboratory Quartz Fixed Point Cells Lead 327.462°C
ITL-M-17671 Fixed Point Cell Primary Laboratory Quartz Fixed Point Cells Zinc 419.527°C
ITL-M-18204 Fixed Point Cell Primary Laboratory Fixed Point Cells Antimony (secondary) 630.63°C
ITL-M-17672 Fixed Point Cell Primary Laboratory Quartz Fixed Point Cells Aluminum 660.323°C
ITL-M-17673 Fixed Point Cell Primary Laboratory Quartz Fixed Point Cells Silver 961.78°C
ITL-M-17674 Fixed Point Cell Primary Laboratory Quartz Fixed Point Cells Copper 1084.62°C   
ITL-M-18205 Nitrogen Boiling Point Apparatus

CHART RECORDERS

LINAX 4000L  Continuous Point Recorder can be used for all standard measurement signals. 
LINAX 4000M Continuous Point Recorder. Pressure, moisture or electrical quantities.
LINAX 4000H Continuous Point Recorder. Control panel, or RS 485/RS 232 interface.
POINTAX 6000M Point Recorder. Pressure, moisture or electrical quantities recording,
POINTAX 6000L2 Point Recorder. Pressure, moisture or electrical quantities recording.

CLAMP ON METERS

50105-G-01 Clamp-On Ammeter 10/25/100/250/500/1000 A. Jaw Size 3.5 in.
50105-G-02 Clamp-On Ammeter 10/25/100/250/500/1000 A. Jaw Size 2.5 in.
50105-G-03 Clamp-On Ammeter 10/25/100/250/500/1000 A. Jaw Size 4.5 in.
50105-G-04 Clamp-On Ammeter 10/25/100/250/500/1000 A. Jaw Size 6 in.
50105-G-05 Clamp-On Ammeter 10/50/100/250/500/2000 A. Jaw Size 2.5 in.
50105-G-06 Clamp-On Ammeter 10/50/100/250/500/2000 A. Jaw Size 3.5 in.
50105-G-07 Clamp-On Ammeter 10/50/100/250/500/2000 A. Jaw Size 4.5 in.
50105-G-08 Clamp-On Ammeter 10/50/100/250/500/2000 A. Jaw Size 6 in.
50105-G-09 Clamp-On Ammeter 10/25/50/100/250/500 A. Jaw Size 6 in.
50105-G-10 Clamp-On Ammeter 10/25/50/100/250/500 A. Jaw Size 2.5 in.
50105-G-11 Clamp-On Ammeter 10/25/50/100/250/500 A. Jaw Size 3.5 in.
50105-G-12 Clamp-On Ammeter 10/25/50/100/250/500 A. Jaw Size 4.5 in.
50105-G-14 Clamp-On Ammeter 50/100/250/500/1000/2000 A. Jaw Size 2.5 in.
50105-G-15 Clamp-On Ammeter 50/100/250/500/1000/2000 A. Jaw Size 3.5 in.
50105-G-16 Clamp-On Ammeter 50/100/250/500/1000/2000 A. Jaw Size 6 in.
50105-G-17 Clamp-On Ammeter 50/100/250/500/1000/2000 A. Jaw Size 4.5 in.

50106-G-01 Clamp-On AC Volt Ammeter. 175/350/700 Volts 10/25/100/250/1000 Amps

0108-G-01 Clamp-On Ammeter with Peak Hold. 50/100/250/500/1000/2000 , Jaw size 2.5 in.
50108-G-02 Clamp-On Ammeter with Peak Hold. 50/100/250/500/1000/2000 , Jaw size 3.5 in.
50108-G-03 Clamp-On Ammeter with Peak Hold. 50/100/250/500/1000/2000 , Jaw size 4.5 in.
50108-G-04 Clamp-On Ammeter with Peak Hold. 50/100/250/500/1000/2000 , Jaw size 6 in.
50106-G-01 Clamp-On AC Volt Ammeter. 175/350/700 Volts 10/25/100/250/1000 Amp

50107-G-01 AC Ground Fault Clamp On Current Leakage Detector 1/2/5/10/20/50 Amp
50107-G-02 AC Ground Fault Current Leakage Detector 1/2/5/10/20/Short Amps Jaw Size 2.5 in.
50107-G-03 AC Ground Fault Clamp On Current Leakage Detector 1/2/5/10/20/50 Amp
50107-G-04 AC Ground Fault Current Leakage Detector 1/2/5/10/20/Short Amps Jaw Size 3.5 in.
50107-G-05 AC Ground Fault Clamp On Current Leakage Detector 1/2/5/10/20/50 Amp.
50107-G-06 AC Ground Fault Current Leakage Detector 1/2/5/10/20/Short Amps Jaw Size 4.5 in.
50107-G-07 AC Ground Fault Clamp On Current Leakage Detector 1/2/5/10/20/50 Amp.
50107-G-08 AC Ground Fault Current Leakage Detector 1/2/5/10/20/Short Amps Jaw Size 6 in.
50107-G-09 AC Ground Fault Clamp On Current Leakage Detector 1/2/5/10/20/50 Amps.
50107-G-10 AC Ground Fault Current Leakage Detector 1/2/5/10/20/Short Amps Jaw Size 9 in.

50127-G-01 Grounding Equipment Ground Cable Tester

METRACLIP 50   Clamp-On Ammeter with Analog Indicator. 1,5  300A AC
METRACLIP 51   Clamp-On Ammeter with Analog Indicator. 15   3000 A AC
METRACLIP 61   Digital Clamp-On Leakage Meter. 300 A AC for leakage current.
METRACLIP 62   Clamp-On Meter for Electrical Technicians. max 400 A AC
METRACLIP 70   Digital Clamp-On Ammeter with digital display. 0,2  1000 A AC, 1400 A DC.
METRACLIP 72   Digital Clamp-On Ammeter. max 1500 AC.
METRACLIP 73   Digital Clamp-On Ammeter. max 1500 AC.
METRACLIP 75   Digital Clamp-On Ammeter. max 1500 AC.

C220 Mini Digital AC Clamp On Current Meter
C221 Mini Digital AC Clamp On Current Meter
C222 Mini AC/DC Clamp On current Meter

Current Transformers   Overview
Multimeters
Power Analyzers

CO CO2 METERS ANALYZERS

315-1 CO level measuring instrument.
316-1 Gas leak detection instrument.
317 Flue gas analyzer. Quickly and efficiently detects escaping heating flue gases.
535 CO2 analyzer. Measuring instrument for building engineers.

325-3 Carbon Monoxide Analyzer CO, temperature, draft, pressure.
325-I Single-gas analyzers are designed to measure CO (high), CO (low), NO or SO2
330-1 Flue Gas Analyzer. CO, CO2, NO, O2, Efficiency temperature. Flue gas analysis.
330-2 Flue Gas Analyzer. CO, CO2, NO, O2, Efficiency temperature. Flue gas analysis.

COIL MEASUREMENT COIL TESTER

9600 Coil Turns Counter Readout Unit. Coil Inductor turns tester.
9601  Coil Turns Counter Platforms. Coil Inductor turns tester platform test stand.
9602  Coil Turns Counter Platforms. Coil Inductor turns tester platform test stand.
9603  Coil Turns Counter Platforms. Coil Inductor turns tester platform test stand.
5863 Shorted Turn Tester.
5867 Portable Quality Tester. Shunted and shorted turns, Insulation Resistance breakdown.

COMBUSTION MEASUREMENT

327-1 Flue Gas Analyzer. Efficiency, flue gas analyzer, CO temperature, draft.
327-1 Flue Gas Analyzer. Efficiency, flue gas analyzer, O2, temperature, draft.
327-1 Flue Gas Analyzer. Carbon Monoxide Analyzer CO, O2, temperature, draft, pressure.
327-2 Flue Gas Analyzer. Carbon Monoxide Analyzer CO, O2, temperature, draft, pressure.
330-1 Flue Gas Analyzer. CO, CO2, NO, O2, Efficiency temperature. Flue gas analysis.
330-2 Flue Gas Analyzer. CO, CO2, NO, O2, Efficiency temperature. Flue gas analysis.

335 Flue Gas Analyzer, temperature, oxygen NO, CO, CO2, NO2, SO2 efficiency.
350 Portable Stack Flue Emission Analyzer flue velocity, humidity, O2, CO, NO, NO2, SO2.

COMPARISON PUMPS

P5511  Comparison Pump Vacuum and Pressure 24 inHg / 800 mbar
P5512  Comparison Pump Pneumatic 300 psi / 20 bar
P5513  Comparison Pump Pneumatic 3500 psi /  220 bar
P5514  Comparison Pump Hydraulic 10 000 psi / 700 bar
P5514V  Comparison Pump Hydraulic, Viton Seals 10 000 psi / 700 bar
P5514EP  Comparison Pump Hydraulic, Skydrol 10 000 psi / 700 bar
P5515  Comparison Pump Hydraulic 20 000 psi / 1400 bar
P5515V  Comparison Pump Hydraulic, Viton Seals 20 000 psi / 1400 bar
P5515EP  Comparison Pump Hydraulic, Skydrol 20 000 psi / 1400 bar
M3800C Comparison Pump  Hydraulic 60 000 psi / 4200 bar

MECP100 Pneumatic Pressure Vacuum Pump - 25 inHg to 100 psi
MECP500 Pneumatic Pressure Vacuum Pump  -29 inHg to 600 psi
MECP10K Hydraulic Pressure Pump 0 to 10000 psi
TP1-40  Portable Handheld Pneumatic Pump. Vacuum Pressure.  -28" Hg to 600 psi.
HTP1 Portable Handheld Pump. Hydraulic High Pressure Pump. Range up to 1000 bar, 14 500 psi. 
LTP1 Pressure Vacuum Pump. Range  30 psi pressure or -850 mbar, 25 in Hg vacuum.

Portable Calibration Kits. Pneumatic, Hydraulic.
Pneumatic Calibration Kits. Range -1 to 25 bar, -14.5 to 360 psi
Hydraulic Calibration Kits. Range 0 to 1000 bar, 15 000 psi
Portable Calibration System fully portable test laboratory.

COMPLIANCE TEST

ESDC 30  ESD Test Generator Simulator. Test level I - IV according to IEC 801-2 and IEC 1000-4-2.
EFTC 30 Burst Generator. EFTC 30 Burst generator conforms to IEC 1000-4-4, IEC 801-4.
CDN 31 Coupling Networks. One Phase coupling network.  
CDN 33 Coupling Networks. Three Phase Coupling Network.  
CCS 30 Coupling Clamp .Used in conjunction with the EFTC 30 burst generator.

COMPONENT BRIDGE

DB210 Bridge. Capacitance, Resistance Inductance bridge. 100kHz, 10kHz, 1kHz, 100Hz 120 Hz. 
DB230 LCR Component Capacitor Tester. Designed for high accuracy testing of capacitors.
DB231 LCR Component Tester Bridge. Designed for manual and automatic high accuracy test.
DB232 LCR Component Tester. Designed for high accuracy testing of capacitors on production lines.
DB233 LCR Capacitor Component Tester. Designed for manual and automatic high accuracy test.
DB234 LCR Component Tester Bridge. Designed for high accuracy testing of capacitors. 
DB236 Capacitor Component Tester. Aluminum Tantalum Capacitors Test Bridge. 
CT10R LCR Bridge Component Tester. Fast and accurate LCR-Bridge. 

CLT10 Component Linearity Tester. Passive electronic components tester.
CLT10/20 Component Linearity Test System. Control Unit and the Measuring Unit.

LCR-500 LCR Meter. Economical Digital LCR Meter.
IMF-600A Impedance Measurement Digital Meter. Capacitance, Inductance, Resistance

COMPONENT TESTER

DB210 Bridge. Capacitance, Resistance Inductance bridge. 100kHz, 10kHz, 1kHz, 100Hz 120 Hz. 
DB230 LCR Component Capacitor Tester. Designed for high accuracy testing of capacitors.
DB231 LCR Component Tester Bridge. Designed for manual and automatic high accuracy test.
DB232 LCR Component Tester. Designed for high accuracy testing of capacitors on production lines.
DB233 LCR Capacitor Component Tester. Designed for manual and automatic high accuracy test.
DB234 LCR Component Tester Bridge. Designed for high accuracy testing of capacitors. 
DB236 Capacitor Component Tester. Aluminum Tantalum Capacitors Test Bridge. 
CT10R LCR Bridge Component Tester. Fast and accurate LCR-Bridge. 

CLT10 Component Linearity Tester. Passive electronic components tester.
CLT10/20 Component Linearity Test System. Control Unit and the Measuring Unit.

LCR-500 LCR Meter. Economical Digital LCR Meter.
IMF-600A Impedance Measurement Digital Meter. Capacitance, Inductance, Resistance

COMMUNICATION AMPLIFIER

AG1020 Linear Amplifier Generator with built-in DDS oscillator. Frequency 10 kHz to 20 MHz.
AG1021 Linear Amplifier Generator with built-in DDS oscillator. Frequency 10 kHz to 14 MHz
AG1017L Linear Amplifier Generator with built-in DDS oscillator. Frequency 10 kHz to 4 MHz
AG1015 Linear Amplifier Generator with built-in DDS oscillator. Frequency 10 kHz to 2 MHz

AG1006 Amplifier and Generator. Ultrasonic. Up to 300 Watts RF Power From 20 kHz to 6 MHz.
AG1014 Amplifier and Generator. Ultrasonic. Up to 500 Watts RF Power From 20 kHz to 2 MHz.
AG1016 Amplifier and Generator. Ultrasonic. Up to 600 Watts RF Power From 20 kHz to 6 MHz.
AG1010 Amplifier and Generator. Ultrasonic. Up to 1000 Watts RF Power From 20 kHz to 2 MHz.
AG1012 Amplifier and Generator. Ultrasonic. Up to 1000 Watts RF Power From 20 kHz to 6 MHz.
AG1024 Amplifier and Generator. Ultrasonic. Up to 2,000 Watts RF Power. From 20 kHz to 6 MHz.
AG1048 Amplifier and Generator. Ultrasonic. Up to 4,000 Watts RF Power. From 20 kHz to 3 MHz.
ULTRA 06-800 Amplifier and Generator. Up to 500 Watts RF Power. From 30 kHz to 800 kHz.

LA5 Broadband Linear Amplifier. 5 Watts, 50 kHz to 700 MHz range. Linear RF amplifier.
LA5M Broadband Linear Amplifier. 5 Watts, 50 kHz to 700 MHz range. Robust linear RF amplifier.
LA10 Broadband Linear Amplifier. 10 Watts. 3 MHz to 1.1 GHz range. Laboratory applications.
LA10M Broadband Linear Amplifier. Amplifier for wideband applications 1 MHz to 1000 MHz range,
LA25M Broadband Linear Amplifier. Air-cooled amplifier module. 25 Watts. 0.3 MHz to 500 MHz.
LA25LD Broadband Linear Amplifier. Two air-cooled amplifiers in one enclosure.
LA50 Broadband Linear Amplifier. Wideband applications in the 25 MHz to 100 MHz range.

CONDITIONERS

SINEAX V604-1120 Universal Programmable Signal Conditioner, Power Supply 24 to 60 V AC/DC
SINEAX V604-1220 Universal Programmable Signal Conditioner, Power Supply 85 to 230 V AC/DC
SINEAX VC603-1120 Programmable Universal Signal Transmitter with 3 Alarms 24 to 60 V AC/DC
SINEAX VC603-1220 Programmable Universal Signal Transmitter with 3 Alarms 85 to 230 V AC/DC
SINEAX TV809-9110 Programmable Voltage, Current Conditioner, Power Supply 24 to 60 V AC/DC
SINEAX TV809-9210 Programmable Voltage, Current Conditioner, Power Supply 85 to 230 V AC/DC
SINEAX TV819-9110 Programmable Voltage, Current Conditioner, Power Supply 24 to 60 V AC/DC
SINEAX TV819-9210 Programmable Voltage, Current Conditioner, Power Supply 85 to 230 V AC/DC

CONDUCTIVITY MEASUREMENT

HD2206.2 Conductivity Bench Meter Thermometer. Measurement of the electric conductivity of liquids
HD2256.2 Conductivity Bench Meter Thermometer. Measurement of the electric conductivity of liquids
HD22569.2 Conductivity Bench Meter. Measurement of the electric conductivity of liquids.
HD3406.2 Conductivity Bench Meter. Measurement of the electric conductivity of liquids.
HD3456.2 Conductivity Bench Meter Thermometer. Measurement of the electric conductivity of liquids
HD2106.1 Conductivity Meter Thermometer. Measurement of the electric conductivity of liquids
HD2106.2 Conductivity Meter Thermometer. Conductivity of liquids and their temperature.
HD2156.1 Conductivity pH Meter Thermometer. Conductivity pH of liquids and their temperature.
HD2156.2 Conductivity pH Meter Thermometer. Conductivity pH of liquids and their temperature.
HD2306.0 Conductivity Meter Thermometer. Measurement of the electric conductivity

HD98569 Data Logger Instrument. pH, conductivity, dissolved oxygen and temperature meter.

230 Complete pH measuring instrument as well as an accurate digital thermometer.
240 Conductivity and temperature measurements with one instrument.

TC-1 Conductivity Tester. Pocketsize splash proof housing enables work on the rain.
CC-101 Waterproof pocketsize conductivity meters and salinity meter
CC-102 Waterproof pocketsize conductivity meters and salinity meter
CC-103 Waterproof pocketsize conductivity meters and salinity meter
CC-411 Conductivity Meter Waterproof. Measures conductivity and temperature.
CC401 Conductivity Salinity Meter. Highly accurate conductivity, salinity, TDS and temperature.
CPC401 pH Conductivity Salinity Meter. Highly accurate conductivity, salinity, TDS,,pH, ORP (mV).
CC501 Conductivity Salinity Meter. Measure Conductivity, salinity, temperature.
CC502 Conductivity Salinity Meter. Measure Conductivity, salinity, temperature, pH and ORP (mV).
CPC501 pH Conductivity Meter. Conductivity, salinity, temperature, pH and ORP (mV).
CPC502 pH Conductivity Meter. Conductivity, salinity, temperature, pH and ORP (mV).

CONDUCTIVITY TRANSMITTER

DO9766TR1 Conductivity Transmitter. Transmitters with temperature compensation, out: 4÷20 mA.
DO9786TR1 Conductivity Transmitter. Transmitters with temperature compensation, out: 4÷20 mA.

CONTACT PROBE THERMOMETER

ST-501 Super Thermometer. PRT reference thermometer, resolution of 0.001ºC

HD2107.1 Digital Thermometer. Thermometer for Pt100 probes -200 degC to +650 degC.
HD2107.2 Digital Thermometer  Datalogger. Thermometer for Pt100 probes -200 degC to +650 degC.
HD2127.1 Digital Thermometer Dual Channel. Thermometer for Pt100 probes
HD2127.2 Digital Thermometer Dual Channel. Datalogger. Thermometer for Pt100 probes
HD2178.1 Digital Thermometer Dual Channel. Thermometer for Pt100 and K, J, T, E, N probes
HD2178.2 Digital Thermometer Dual Channel. Datalogger. Pt100 and K, J, T, E, N probes
HD2307.0 Digital Thermometer Thermometer for Pt100 probes -200 degC to +650 degC.
HD9214   Digital Thermometer. Accuracy with standards IEC 751/1983, BS 1904/1984, DIN
HD9215  Digital Thermometer. Temperature measurement with a Pt100 Platinum sensor
HD9016  Digital Thermometer. Carries out measurements on two inputs: input A, input B. Differential HD2108.1 Digital Thermometer. One input K, J, T, E, R, N, S, B probes. RS232 data transfer
HD2108.2 Digital Thermometer  Datalogger. One input K, J, T, E, R, N, S, B probes. Storage
HD2128.1 Digital Thermometer. Two inputs K, J, T, E, R, N, S, B probes. Storage
HD2128.2 Digital Thermometer  Datalogger. Two inputs K, J, T, E, R, N, S, B probes.
HD2178.1 Digital Thermometer. Two inputs K, J, T, E, N probes. Storage of Max, Min.
HD2178.2 Digital Thermometer  Datalogger. Two inputs K, J, T, E, N probes.  Data Logger USB
HD2328.0 Digital Thermometer. Two inputs K, J, T, E probes. Range -200°C...+1370°C.
HD9218 Digital Thermometer. Thermometer K type thermocouple. Stores the MAX and MIN values.

C303 Dual Input Thermometer Dual Display, Temperature Meter
C306 Dual Input, Thermometer Triple Display, Digital Thermometer. Data Logger
C307 Mini Thermometer. Temperature Measurement.
C308 Mini Dual Input thermometer, Dual Display
C500 Temperature Graphing Recorder
LTM917 Economy Series Precision Thermometer
TM939 IR Infra Red Thermometer

105 Handheld Thermometer. T-handle Thermometer for food industry. Range : -50°to 275°C.
106 Handheld Thermometer. Thermometer for food industry. Range : -50°to 230°C.
110 Handheld Thermometer. Range : -50°to 275°C.
112 Handheld Thermometer. Thermometer for food industry. Range : -50°to 300°C.
720 Handheld Thermometer. Range : -100°to 800°C.
735-1 Handheld Thermometer. Range : -200°to 1370°C.
735-2 Handheld Thermometer. Range : -200°to 1370°C.
905T1 Mini Penetration Thermometer. Range -50 to +350°C.
905T2 Mini Surface Thermometer. Range -50 to +350°C.
922 Thermometer Two Channels. Differential temperature. Range -50 to +1000°C.
925 Handheld Thermometer. Range: -50° to 1000°C (-60° to 1850°F).
926 Handheld Thermometer Food Industry. Temperature measurement range: -50° to 400°C
950 Handheld  Thermometer. Accurate Reference Thermometer. Range: -200° to 1760 °C.

CONTROLLERS

R2080  96 x 96 mm Compact Temperature Controller with Digital Display.
R2100  96 x 96 mm Compact Temperature Controller with Digital Display for Actual Value
R2180  96 x 96 mm Compact Temperature Controller with Digital Display for Actual Value
R2300  Compact Temperature Controller, 48 x 24 mm
R2400  Compact Temperature Controller, 48 x 48 mm
R2600  Compact Temperature Controller, 48 x 96 mm
R2900  Compact Temperature Controller, 96 x 96 mm
R0550  Universal Temperature Controller, 96 x 96 mm, without / with Programmer
R0300  Compact Temperature Controller, 96 x 96 mm, 2 / 4-Channel

R6000  8-Channel Temperature Controller in Top-Hat Rail Housing
R9000  Modular 19" Rack System 3HE
R7101  3HE 16TE 8-channel 19" controller module
SR 12E 6HE 4TE 12-channel 19" controller module

HD3020/1 Temperature regulator with bar attachment.
HD 3020/2 Temperature regulator with bar attachment
HD 404 Temperature Regulator. Temperature Humidity Controller. For transmitters with 4÷20mA input.
HD4030 Thermostat for regulating thermal processes that require a high degree of precision.
HD4030BM Thermostat Temperature Regulator. Three point regulation (Heating-OFF-Cooling).
HD4032 Temperature Regulator with an analog output and an ON/OFF relay output. 
HD4034  Temperature Regulator. ON/OFF regulator with relay output (1 exchange contact 3A/22OV). 
HD4044 Temperature Regulator. ON/OFF regulator with relay output contact 5A/22OV resistive.
HD4045 Temperature regulator with relay ON/OFF output.
HD4049 Temperature Relative Humidity regulator needs temperature and humidity transmitters.
HD2017T Humidity Regulator Transmitter. Relative humidity transmitters, regulator.
HD5002 Humidity Temperature Regulator Controller. Temperature and humidity regulating system.
HD5002/5 Humidity Temperature Regulator Controller. Temperature and humidity.
HD9022 Process Indicator. The microprocessor control LED panel instrument with alarm thresholds.
DO9404 Process Indicator. Dual regulating indicator panel instrument. 
HD4037 Temperature Indicator Regulator. Range is from -50°C to +850°C. 

DMY2015 Process Multi Loop Indicator. 
TY2095 Process Data Acquisition Module. Eight linear inputs with reset.  
DMY2030 Process Dual Indicator configurable up to 8 digits (totalizers) and 4 1/2 digits (indicators).
DMY2030-TOT  Process Dual Indicator and Totalizer
DMY2011 Dual Process Indicators their robust construction.
DMY2035 Dual Process Indicators their robust construction.
DMY2030-Light  Process Indicator
DMY2030-TOT-Light Process Indicator Totalizer.
DMY2017 Pressure Indicator Single or dual pressure version.
DMY2030-TOT-FCS Process Dual Counter Applied to count parts or pulses from any sensors.
DMY2031-FCS Process Dual Counter Applied to count parts or pulses from any sensors.
DCY2050 Universal Process Dual Loop Controller. Outputs 4-20mA, 1-5Vdc and 0-10Vdc, isolated.
DCY2051 Universal Process Dual Loop Controller. Two analog output modules.
DCY2060 Universal Process Dual Loop Controller. Up to two analog output modules. Isolated.
DCY2057 Dual Pressure Controller High accuracy. Linearization of RTD, thermocouple.
DCY2050-Light Universal Process Controller Up to two SPDT relay alarm modules.
DCY2051-Light Universal Process Controller Up to two SPDT relay alarm modules.
DCY2060-Light Universal Process Controller Up to two SPDT relay alarm modules.
DCY2058 Process Dual Loop Auto Manual Station Up to two analog output modules.
TY-2090 Universal Smart Transmitter Two universal standard inputs for RTD, thermocouples.

CONVERTERS

ARINC429 to NMEA0183 Data converter. ARINC 429 data bus onto an RS232 or RS422. 
ARINC429 to 0-10VDC Output Data converter. ARINC 429 to analog 0-10VDC output.
ARINC429 to Relay Output Data converter. ARINC 429 translate it into a switched discrete output. 
ARINC429 to MIL-STD-1553 Data converter. ARINC 429 data bus to a MIL-STD-1553 data bus.
ARINC429 to RS232 Data converter. ARINC429 data onto  an RS232 databus.
ARINC429 to RS422 Data converter. ARINC429 data onto an RS422 databus
MIL-STD-1553 to ARINC429 Data converter. MIL-STD-1553 databus to an ARINC 429 data bus. 
MIL-STD-1553 to Relay Output Data Converter. MIL-STD-1553 databus to Relay output.
MIL-STD-1553 to 0-10VDC Data converter. 1553 data word contained to analog 0-10VDC.
RS232 to ARINC429 Data converter. Received RS232 data onto the ARINC429 databus converter. 
RS422 to ARINC429 Data converter. RS422 data onto the ARINC429 databus converter. 

CORONA DETECTOR

XDP Partial Discharge Detection System. Underground electrical cables and joints monitor.
XDP II Partial Discharge Detector. Recorder and diagnostic System.
XDP TRANS Distribution Transformer Partial Discharge Measuring KIT.
PDS Partial Discharge scanner Medium voltage insulated joints condition monitor.
ULD-40 Ultrasonic Corona / Arcing Detector. Medium voltage insulated joints condition monitor.

COUNTERS

DMY2030 Process Dual Indicator configurable up to 8 digits (totalizers) and 4 1/2 digits (indicators).
DMY2030-TOT  Process Dual Indicator and Totalizer
DMY2030-TOT-Light Process Indicator Totalizer.

COUPLING NETWORKS CLAMP

CDN 31 Coupling Networks. One Phase coupling network.  
CDN 33 Coupling Networks. Three Phase Coupling Network.  
CCS 30 Coupling Clamp .Used in conjunction with the EFTC 30 burst generator.

CURRENT VOLTAGE DATALOGGER

DAQPro 5300 Multi inputs Datalogger. Eight channel datalogger. Portable data logging system
175-S1 1 Channel Current Voltage datalogger.
175-S2 1 Channel Current Voltage datalogger. With Display
VR-71 Voltage Data Logger. Voltage Current Recorder Data Logger.
RVR-52A Wireless Data Logger. Voltage Pulse Recorder Data Logger.

CURRENT LOOP CURRENT CALIBRATOR

MasterCal990 Precision Multi-function documenting Calibrator and HART configurator communicator.
MC1000 Multifunction Calibrator. Thermocouples, RTD's, Ohms, Voltage, current, frequency, pressure
MC1200 Multi-function Dual Display Calibrator. Excellent accuracy ±0.4°C T/C ±0.3°C RTD
DMC1400 Multifunction Documenting Calibrator. Excellent accuracy. HART compatibility.
PTC8001 Universal Temperature Calibrator. Precision Temperature Calibrator. Thermocouples RTDs
M2000A Bench Calibrator, Lab Standard. Voltage and Current Calibrator.
3001 Laboratory Bench Standard Voltage Current Calibrator. Source or measure

IVC222HPII Voltage Current Calibrator. General purpose current and voltage source.
LC100 Process Calibrator. Accuracy of 0.015% of reading, with 0.001 mA resolution.
LCC421 Economy Series Voltage Current Calibrator
MS420 Mini-Source Portable Calibrator 
PSC4000 Process Signal Calibrator. Full function voltage and current calibrator.

UC-504 Universal Calibrator. Measures and generates mA, mV, Volts, Ohms, RTD, TC and Hz.
LC-505 Loop Calibrator. Measures and generates standard signals for current and voltage loops.

CURRENT METER

50105-G-01 Clamp-On Ammeter 10/25/100/250/500/1000 A. Jaw Size 3.5 in.
50105-G-02 Clamp-On Ammeter 10/25/100/250/500/1000 A. Jaw Size 2.5 in.
50105-G-03 Clamp-On Ammeter 10/25/100/250/500/1000 A. Jaw Size 4.5 in.
50105-G-04 Clamp-On Ammeter 10/25/100/250/500/1000 A. Jaw Size 6 in.
50105-G-05 Clamp-On Ammeter 10/50/100/250/500/2000 A. Jaw Size 2.5 in.
50105-G-06 Clamp-On Ammeter 10/50/100/250/500/2000 A. Jaw Size 3.5 in.
50105-G-07 Clamp-On Ammeter 10/50/100/250/500/2000 A. Jaw Size 4.5 in.
50105-G-08 Clamp-On Ammeter 10/50/100/250/500/2000 A. Jaw Size 6 in.
50105-G-09 Clamp-On Ammeter 10/25/50/100/250/500 A. Jaw Size 6 in.
50105-G-10 Clamp-On Ammeter 10/25/50/100/250/500 A. Jaw Size 2.5 in.
50105-G-11 Clamp-On Ammeter 10/25/50/100/250/500 A. Jaw Size 3.5 in.
50105-G-12 Clamp-On Ammeter 10/25/50/100/250/500 A. Jaw Size 4.5 in.
50105-G-14 Clamp-On Ammeter 50/100/250/500/1000/2000 A. Jaw Size 2.5 in.
50105-G-15 Clamp-On Ammeter 50/100/250/500/1000/2000 A. Jaw Size 3.5 in.
50105-G-16 Clamp-On Ammeter 50/100/250/500/1000/2000 A. Jaw Size 6 in.
50105-G-17 Clamp-On Ammeter 50/100/250/500/1000/2000 A. Jaw Size 4.5 in.

50106-G-01 Clamp-On AC Volt Ammeter. 175/350/700 Volts 10/25/100/250/1000 Amps

0108-G-01 Clamp-On Ammeter with Peak Hold. 50/100/250/500/1000/2000 , Jaw size 2.5 in.
50108-G-02 Clamp-On Ammeter with Peak Hold. 50/100/250/500/1000/2000 , Jaw size 3.5 in.
50108-G-03 Clamp-On Ammeter with Peak Hold. 50/100/250/500/1000/2000 , Jaw size 4.5 in.
50108-G-04 Clamp-On Ammeter with Peak Hold. 50/100/250/500/1000/2000 , Jaw size 6 in.
50106-G-01 Clamp-On AC Volt Ammeter. 175/350/700 Volts 10/25/100/250/1000 Amp

50107-G-01 AC Ground Fault Clamp On Current Leakage Detector 1/2/5/10/20/50 Amp
50107-G-02 AC Ground Fault Current Leakage Detector 1/2/5/10/20/Short Amps Jaw Size 2.5 in.
50107-G-03 AC Ground Fault Clamp On Current Leakage Detector 1/2/5/10/20/50 Amp
50107-G-04 AC Ground Fault Current Leakage Detector 1/2/5/10/20/Short Amps Jaw Size 3.5 in.
50107-G-05 AC Ground Fault Clamp On Current Leakage Detector 1/2/5/10/20/50 Amp.
50107-G-06 AC Ground Fault Current Leakage Detector 1/2/5/10/20/Short Amps Jaw Size 4.5 in.
50107-G-07 AC Ground Fault Clamp On Current Leakage Detector 1/2/5/10/20/50 Amp.
50107-G-08 AC Ground Fault Current Leakage Detector 1/2/5/10/20/Short Amps Jaw Size 6 in.
50107-G-09 AC Ground Fault Clamp On Current Leakage Detector 1/2/5/10/20/50 Amps.
50107-G-10 AC Ground Fault Current Leakage Detector 1/2/5/10/20/Short Amps Jaw Size 9 in.

50127-G-01 Grounding Equipment Ground Cable Tester

METRACLIP 50   Clamp-On Ammeter with Analog Indicator. 1,5  300A AC
METRACLIP 51   Clamp-On Ammeter with Analog Indicator. 15   3000 A AC
METRACLIP 61   Digital Clamp-On Leakage Meter. 300 A AC for leakage current.
METRACLIP 62   Clamp-On Meter for Electrical Technicians. max 400 A AC
METRACLIP 70   Digital Clamp-On Ammeter with digital display. 0,2  1000 A AC, 1400 A DC.
METRACLIP 72   Digital Clamp-On Ammeter. max 1500 AC.
METRACLIP 73   Digital Clamp-On Ammeter. max 1500 AC.
METRACLIP 75   Digital Clamp-On Ammeter. max 1500 AC.

C220 Mini Digital AC Clamp On Current Meter
C221 Mini Digital AC Clamp On Current Meter
C222 Mini AC/DC Clamp On current Meter

Current Transformers   Overview
Multimeters
Power Analyzers

CURRENT TRANSMITTERS TRANSDUCERS

SINEAX I538 AC Current Transducer
SINEAX I552 True RMS AC Current Transducer 1 & 5 A or 1.2 & 6 A
SINEAX C402-11 Alarm Unit for DC Voltage or Current 24-60 V DC/AC
SINEAX C402-12 Alarm Unit for DC Voltage or Current 85-230 V DC/AC