Phone: 253-927-6186
 Email: sales@hotektech.com

Vacuum Pressure Calibration Pump Kit

The LTP1 Vacuum pressure pump acts as a dual source of pressure and vacuum.
This hand pump's small range makes very fine adjustments easier.

 low pressure vacuum calibration pump kit

The Hydraulic Pump Kit includes:
LTP1 Pneumatic Pressure Pump 
Hard Sided Carrying Case
Fittings
User Manual
Calibration Hoses
Output Pressure: 0 to 2000 mbar, 30 psi
Output Vacuum: 0 to -850 mbar, 0 to -25 in Hg

Pneumatic Hand Pump Kit

Model  Description 
LTP1  Pneumatic Hand Pump pressure and vacuum from 25 inHg vacuum to 30 psi
LTP-1-K  Pneumatic Hand Pump Kit with six NPT fittings and carrying case

MECP100 Vacuum Low Pressure Calibration Pump Kit

MECP100 Pneumatic Pressure Pump. Pneumatic Hand Pump for Calibration Vacuum to 100 PSI.
The Pneumatic Hand Pump is designed to be a simple to use pressure and vacuum source for calibrating
process control instrumentation. Combined with one of our pressure calibrators, the pump makes a complete Pneumatic and Vacuum Calibration System for low pressure applications.

 Vacuum pressure calibration kit
The Pneumatic Pressure Pump Kit includes:
MECP100 Pneumatic Pressure Pump
Hard Sided Carrying Case
(2) Quick Disconnect Fittings
User Manual and
Teflon Tape Calibration Hose
Hand Pump Max. Rated Pressure: 100PSI (7 BAR) Max. Rated Vacuum: –12.00PSI (–.85 BAR) Max.
Wetted Materials: Aluminum, Silicon, Neoprene, Stainless Steel, Buna-N
Inlet fitting: 1/8" brass female NPT
Outlet fitting: 1/8" brass male NPT Length: 2.125 in.

MECP100 Pneumatic Pressure Pump

Model  Description 
MECP100 Low Pressure and Vacuum Pump-ONLY -12 to 100 psi,  
MECP100 Kit Calibration Pump with test hose and one 1/8" FNPT port case  

Pneumatic Pressure Calibration Kits

Dual source of pneumatic pressure and vacuum. Generating up to 600 psi pressure or -28 inHg vacuum.
Adjustable stroke to provide over pressure protection. Quick fit instruments are available to use with the
system including electronic calibrators, digital indicators and analogue gauges.

 Pressure Vacuum calibration pump kit


The Hydraulic Pump Kit includes:
TP1-40 Pneumatic Pressure Pump
Hard Sided Carrying Case
Fittings
User Manual Calibration
Hoses
Output Pressure: 0 to 600 psi (Adjustable)
Output Vacuum: 0 to -28 inHg (Adjustable)

TP1-40 Pneumatic Hand Pump Kit

Model  Description
TP1-40  Pneumatic Hand Pump Only
TP1-40-K Kit  Pneumatic Hand Pump Kit 

MECP500 Pneumatic Pressure Pump Kit

MECP500 Pneumatic Pressure Pump. Pneumatic Hand Pump for Calibration Vacuum to 600 PSI.
The Pneumatic Hand Pump is designed to be a simple to use pressure and vacuum source for calibrating process control instrumentation.

 Pneumatic pressure calibration kit
The Pressure Pump Kit includes:
MECP500 Vacuum Pressure Pump
Hard Sided Carrying Case
(2) Quick Disconnect Fittings
User Manual and
Teflon Tape Calibration Hose
Hand Pump Pressure: 600PSI
Rated Vacuum: –12.00PSI (–.85 BAR) Max.
Wetted Materials: Aluminum, Silicon, Neoprene,
Stainless Steel, Buna-N
Inlet fitting: 1/4" female NPT (top)
Outlet fitting: 1/8" female NPT (side)

MECP500 Pneumatic Pressure Pump Kit

Model  Description
MECP500   Pump - Pressure and Vacuum. -12 to 600 PSI
MECP500 Kit   Pressure Vacuum Pump Kit. Case and accessories 

Hydraulic pressure calibration kit

HTP1-700 and HTP1-1000 are lightweight, easy to use and can generate pressures up to 700 bar / 1000 bar,
10 000 psi / 14 500 psi.
HTP1 pressure pump is well suited for calibrating pressure transmitters, pressure transducers,
pressure switches and pressure gauges.

 Hydraulic pressure calibration pump kit

The Hydraulic Pump Kit includes:

HTP1 Pneumatic Pressure Pump
Hard Sided Carrying Case
Fittings User Manual
Calibration Hose
Pressure range: 0 to 700 bar / 0 to 1000 bar max. (10 000 psi / 14 500 psi).
Pressure media: Mineral based Hydraulic Oil (DW6292 shown below) Distilled water ( 'Skydrol' and brake fluid option available HTP1-S )

Hydraulic Pressure Calibration Pump Kit

Model  Description
HTP1-700  Hydraulic Hand Pump 0 to 10,000 psi (0 to 700 bar)
HTP1-700-K  Hydraulic Pressure Pump Kit with case adapters and hose
HTP1-1000  Hydraulic Portable Pump 0 to 14,500 psi (0 to 1000 bar)
HTP1-1000-K  High Pressure Pump Kit with one test hose and one ¼" FNPT port 

MECP10K Hydraulic Pressure Pump Kit

MECP10K Hydraulic Pressure Pump. Hydraulic High Pressure Hand Pump. Range 0 to 10000 PSI.
The High Pressure Hydraulic Hand Pump is designed to be a simple to use high pressure source for
calibrating process control instrumentation.

Hydraulic Pressure Calibration Kit 

The Hydraulic Pump Kit includes:
MECP10K Hydraulic Pressure Pump
Hard Sided Carrying Case
High Pressure Hose
(2) Quick Disconnect Fittings
User Manual and Teflon Tape

Hand Pump Pressure: 10000 PSI.
1 Connection: 1/4" female NPT (top)
2 Connection: 1/4" female NPT (side)

MECP10K Hydraulic Pressure Pump Kit.

Model  Description
MECP10K   Pump only - Hydraulic Pump using D.I. water or oil,
MECP10K Kit   Hydraulic Pump (0 to 10,000 PSI) with case and accessories 

We accept

  • American Express
  • Master Card
  • VISA
  • Purchase Orders

Company

  • Hotek Technologies, Inc
  • tel: 253-927-6186
  • sales@hotektech.com
  • services@hotektech.com
  • info@hotektech.com