DT-315AEB Stroboscope with power pack.
The DT-315AEB Stroboscope with
external battery pack
is truly portable stroboscope.
The DT-315AEB stroboscope operates independent
of line power via an exterior battery pack that can
be carried with a convenient shoulder harness or set down to
allow the operator full movement for visual
inspection.
When fully charged, rechargeable batteries power
the strobe for approximately four continuous hours.
The DT-315AEB stroboscope also incorporates the
same impressive features as our
DT-311A and
DT-315A strobes.
DT-315A Stroboscope
| Model | Description | List Price | Sale Price |
| DT-315AEB | Stroboscope (115VAC Fast Charger) | $695.00 | $653.00 |
| DT-315AEB | Stroboscope (220 VAC, 50/60 Hz Fast Charger) | $750.00 | $705.00 |
Stroboscope is ideally suited for printing inspection, motion
analysis, preventive maintenance
and speed measurement of repetitive motion, our strobes provide
timely data on vibrating parts,
leaks, spray patterns and a variety of industrial and scientific
operations.
The DT-315AEB stroboscope is extremely easy to operate via its
lightweight and compact design,
its rugged metal construction provides unequaled
reliability in the harshest environments.
DT-315AEB Stroboscope
| Model | DT-315AEB |
| Flashing Range | 40.0 - 35,000 fpm (flashes per minute) |
| Accuracy | ±0.01 % of reading |
| Resolution | 0.1 fpm: 40.0 - 5,000 fpm 0.2 fpm: 5,001 - 8,000 fpm 0.5 fpm: 8,001 - 10,000 fpm 1 fpm : 10,001 - 35,000 fpm |
| Phase Shift | Use +/- push buttons (360° in 6 seconds) |
| Display Update Time | 0.2 seconds approx. |
| Output Signal | Synchronous, 400 μsec. Pulse output, 0 to +12 VDC amplitude (approx.), 4.7 KΩ impedance |
| Rate Multiplier Divider | Multiply by 2, divide by 2 |
| Flashing Range | 0.0 to 35,000 fpm |
| External Mode Accuracy |
±0.01 % ±1 digit |
| Phase Shift | 0 to 359° with 1° resolution |
| Delay Time | 0 to 2,000 msec from 40 - 10,000 fpm |
| External Trigger Input Signal | LO level: 0 -0.8 VDC, HI level: 2.5 - 12 VDC or open
collector (NPN), pulse width 50 μsec min |
| Input Impedance | 4.7 KΩ to 12 V / 6.8 KΩ to 0 V |
| Display | 5 digits, 0.4" (10 mm) high, LED |
| Flash Tube Power/Life |
Xenon, 10 W max. (100 million flashes) |
| Flash Duration | 10 - 40 μsec |
| Sensor Power Supply | 12 VDC (40 mA) |
| Battery Life | 1 - 2 hours depending on flash rate |
| Low Battery Indicator | Display shows all L’s |
| Power Requirement | External battery pack (9.8 - 14.5 VDC, 2.3A) |
| Operating Temperature | 32° - 104°F ( 0 - 40°C ) |
| Weight | 2.5 lb (1.1 kg) |
| Dimensions | 7.28" L x 4.72" W x 4.72" H (185 mm x 120 mm x 120 mm) |
| Warranty | 1 year |
| Standard Accessories | External battery pack with charger |
| Optional Accessories | Carrying case, sensors, SG-300 strobe guard, SAS-DT300 flexible swing arm, daisy chain cables, NIST traceable certificate |
