Phone: 253-927-6186
Home > Instruments > Stroboscope > DT-315P Stroboscope Tachometer

DT-315P Stroboscope Tachometer.

The DT-315P Stroboscope for harsh use.
The DT-315P is a rugged, sealed (IP65) Stroboscope suitable for working in areas without AC power.
The DT-315P stroboscope works just like the DT-315A battery operated strobe, however flash tube life
is increased, so maintenance of the DT-315P is less.
Equipped with Phase shifting in angle of delay (0-359 degrees) and flash time delay (0-300 msec)
the DT-315P stroboscope is engineered for checking speed, timing and wear on rotating and reciprocating

DT-315P Stroboscope

Model  Description 
DT-315P  Stroboscope (115 VAC, IP-67 Sealed Stroboscope) 
DT-315P  Stroboscope (220 VAC, IP-67 Sealed Stroboscope) 

The DT-315P stroboscope with its rugged "bumper", sealed body, and internal (rechargeable) battery,
provides the maintenance and quality professional, a rugged and accurate strobe-tachometer
for inspection in harsh environments, of presses, conveyers, gear reducers, chain drives, fuel injectors,
spray (paint) patterns, and many other industrial applications.

DT-315P Stroboscope
Model  DT-315P 
Flashing Range  60.0 ~ 3,300 fpm 
Display Accuracy  ± 0.01 % of reading 
Update Time  Approx. 0.2 seconds 
Output Signal  Approx. 12V 
Other Functions  ÷2, x2 Flashings, Phase shift adjustment amplitude (approx.), 4.7 KΩ
Flashings  Synchronous mode: 60.0 ~ 3,300fpm / Delay mode: 200 ~ 3,300 fpm 
Delay Angle Range  Delay mode: 0 ~ 359°, Set by 1° 
Display  rpm, Synchronous mode: 60.0 ~ 3300fpm / Delay Angle,
Delay mode: 0 ~ 359° or 0 ~ 300mS conversion display 
Display Accuracy  Synchronous mode: ± 0.01% plus ± 1 digit
Delay mode: + 0 -0.2mS plus ± 1 digit 
Update Time  1 / second 
Input Signal  H Level: 2.5 ~ 12V / L level: 0 ~ 0.4V / 50 μs or over for H.L. level
Trigger at rising edge / Approx. 10 KΩ impedance 
Sensor Power  Battery: 6.8 ~ 11.0V /
Adapter: 10.2 ~ 12.2V /
DC: 9 ~ 14.5V : 7.8 ~ 14.1V / max. 40mA (including max 0.6V Ripple) 
Display  5 digit, 7 segment red LED (Character height 10mm) 
Setter  Flashing, Delay angle: Jog Shuttle / Mode, Display Unit: Tact Switch 
Flashtube  Xenon lamp Flashtube 311-2 
Flashtube Power  max. 10W 
Flash Duration  Approx. 30 μ sec 
Power  Battery: NiCad battery, 8KR - 2000 sce SANYO,
Operating time: Approx. 1 hour (full charge at 3000 fpm)
Battery charge time: Approx. 10 hours
Do not operate over 10 hours continuously (External power:
Disconnect the built-in battery before operating instrument by
external power)
DC 9V - 14.5V, Max. 24W (current consumption is 24W/input voltage)
operate by provided adapter / AC115V 10%, 50/60 Hz max. 40VA 
Operating Temperature  0 - 40°C 
Dimensions  5.11" W x 6.22" H x 10.20" L (130 W x 158 H x 259 L mm) 
Weight  5.11" W x 6.22" H x 10.20" L (130 W x 158 H x 259 L mm) 
Weight  Approx. 4.6 lbs (2.1 kg) 
Power Plug  PJ-2 (Sato parts) or the equivalent 
Accessories  Input / Output signal plug, AC adapter, flash tubes 
Optional Accessories  NIST traceable certificate