DT-315P Stroboscope Tachometer.
The DT-315P Stroboscope
for harsh use.
The DT-315P is a rugged, sealed (IP65) Stroboscope suitable for
working in areas without AC power.
The DT-315P stroboscope works just like the DT-315A battery
operated strobe, however flash tube life
is increased, so maintenance of the DT-315P is less.
Equipped with Phase shifting in angle of delay (0-359 degrees)
and flash time delay (0-300 msec)
the DT-315P stroboscope is engineered for checking speed, timing
and wear on rotating and reciprocating
machinery.
DT-315P Stroboscope
| Model | Description | List Price | Sale Price |
| DT-315P | Stroboscope (115 VAC, IP-67 Sealed Stroboscope) | $1,240.00 | $1,165.00 |
| DT-315P | Stroboscope (220 VAC, IP-67 Sealed Stroboscope) | $1,340.00 | $1,259.00 |
The DT-315P stroboscope with its rugged "bumper", sealed body,
and internal (rechargeable) battery,
provides the maintenance and quality professional, a rugged and
accurate strobe-tachometer
for inspection in harsh environments, of presses, conveyers, gear
reducers, chain drives, fuel injectors,
spray (paint) patterns, and many other industrial applications.
DT-315P Stroboscope
| Model | DT-315P |
| Flashing Range | 60.0 ~ 3,300 fpm |
| Display Accuracy | ± 0.01 % of reading |
| Update Time | Approx. 0.2 seconds |
| Output Signal | Approx. 12V |
| Other Functions | ÷2, x2 Flashings, Phase shift adjustment amplitude
(approx.), 4.7 KΩ impedance |
| Flashings | Synchronous mode: 60.0 ~ 3,300fpm / Delay mode: 200 ~ 3,300 fpm |
| Delay Angle Range | Delay mode: 0 ~ 359°, Set by 1° |
| Display | rpm, Synchronous mode: 60.0 ~ 3300fpm / Delay Angle, Delay mode: 0 ~ 359° or 0 ~ 300mS conversion display |
| Display Accuracy | Synchronous mode: ± 0.01% plus ± 1 digit Delay mode: + 0 -0.2mS plus ± 1 digit |
| Update Time | 1 / second |
| Input Signal | H Level: 2.5 ~ 12V / L level: 0 ~ 0.4V / 50 μs or
over for H.L. level Trigger at rising edge / Approx. 10 KΩ impedance |
| Sensor Power | Battery: 6.8 ~ 11.0V / Adapter: 10.2 ~ 12.2V / DC: 9 ~ 14.5V : 7.8 ~ 14.1V / max. 40mA (including max 0.6V Ripple) |
| Display | 5 digit, 7 segment red LED (Character height 10mm) |
| Setter | Flashing, Delay angle: Jog Shuttle / Mode, Display Unit: Tact Switch |
| Flashtube | Xenon lamp Flashtube 311-2 |
| Flashtube Power | max. 10W |
| Flash Duration | Approx. 30 μ sec |
| Power | Battery: NiCad battery, 8KR - 2000 sce SANYO, Operating time: Approx. 1 hour (full charge at 3000 fpm) Battery charge time: Approx. 10 hours Do not operate over 10 hours continuously (External power: Disconnect the built-in battery before operating instrument by external power) DC 9V - 14.5V, Max. 24W (current consumption is 24W/input voltage) operate by provided adapter / AC115V 10%, 50/60 Hz max. 40VA |
| Operating Temperature | 0 - 40°C |
| Dimensions | 5.11" W x 6.22" H x 10.20" L (130 W x 158 H x 259 L mm) |
| Weight | 5.11" W x 6.22" H x 10.20" L (130 W x 158 H x 259 L mm) |
| Weight | Approx. 4.6 lbs (2.1 kg) |
| Power Plug | PJ-2 (Sato parts) or the equivalent |
| Accessories | Input / Output signal plug, AC adapter, flash tubes |
| Optional Accessories | NIST traceable certificate |
