|
|
STROBOSCOPE DT-311J
|
|
DT-311J Stroboscope
for harsh and wet work areas.
Where powerful
illumination and rugged speed measuring accuracy are required for
the textile industry, the DT-311J will perform where other
stroboscopes will not.
The DT-311J
Strobe is used to set injection timing, injection pressure, timing
of shedding and weft running time of weaving machinery. Rugged-Drip
Proof
(IP65) Housing, High Performance Accuracy, Special Phase shifting,
w/ Shock Absorbing components and top mounted handle, allows the
equipment operator maximum flexibility when setting the timing of
weaving machinery..
|
Digital Stroboscope |
| Our
Price: |
Contact us for
pricing |
| Phone:
|
253-927-6186
866-318-6186 |
| Fax:
|
253-927-6189 |
| email:
|
sales@hotektech.com |
|
|
|
|
|
|
Digital Stroboscope Specification |
|
| Model |
DT-311J |
| Flash Rate |
200 - 1,500 rpm |
| Phase Shift |
0 - 359° / 1°
increments |
| Internal Signal Range |
200 to 1,500 rpm /
fpm |
| Flash Rate / Phase Angle Tester |
Rotary Encoder |
| Display |
4 digit 10mm high
Red LED |
| Divide Ratio |
1/1, 1/2, 1/3, 1/4,
2/4 with shift |
| Input Signal |
High level: 5 to 24V
Pulse width 2 msec min.
Low level: 0 to 1V Pulse width 2 msec min.
Output impedance less than 10 KΩ |
| Input Impedance |
47 KΩ |
| Display Mode |
Phase shift
(degree), Tachometer |
| Accuracy |
±1 digit |
| Flashtube |
Xenon lamp Flashtube
311-J / max: 10W at 1,500 rpm
Life: 1,200 hours at 1,500 rpm |
| Operating Temperature |
0 to 40° C |
| Power Requirement |
115 VAC±5% 50/60Hz |
| Power Consumption |
20 VA max |
| Dimensions |
5.85" W x 6.85" H x
8.42" (149 W x 174 H x 214 L mm) |
| Weight |
4.2 lbs (1.9 Kg) |
| Accessories Included |
19.68’ (6m) cable w/
connector, Instruction manual,
rubber strobe guard w/ handle |
|
|
