Toll Free: 866-436-2430                     Email: sales@hotektech.com

  
 
Instruments, calibrators, standards, analyzers, dataloggers. analyzers
 
  Test measurement instrumens. Analytical instruments, ph meters, dissolved oxygen meter, hygrometer, salinity meter, weather instruments. Power analyzers, Gas combustion analyzer, Electronic load, Harmonic analyzer. Pressure calibrator, deadweight tester, temperature calibrator, current loop calibrator. Temperature datalogger, humidity datalogger, barometric pressure datalogger, wireless datalogger. Hygrometer, humidity datalogger, HVAC instrument, humidity controllers transmitters. Candela meter, Luminance meter, Radiometer, Albedometer, Luminance transmitter. Cable detectors, coil tester, insulation resistance, resistance bridge, tachometers. Digital multimeter, clamp on meter, amperometer, current meter, high line voltmeter, phasing sequence meter.  
  Resistance bridge, ohmmeter, insulation resistance meter, multimeters, milli ohmmeter, micro ohmmeter, megohmmeter. Manometer, Pressure gauge, deadweight tester, pressure pump, vacuum pump, pressure calibrator. Simulator, Calibrator, resistance standard, resistor decade, inductance standard, thermometry standards. Thermometry bridge, precision thermometer, infrared thermometer, temperature calibrator, dry block calibrator. Current transmitter, Luminance transmitter, energy transmitter, pressure transmitter, temperature transmitter.  
 

Search  

 
 
 

STROBOSCOPE DT-315P

DT-315P Stroboscope for harsh use.
The DT-315P is a rugged, sealed (IP65) Stroboscope suitable for working in areas without AC power.
The DT-315P works just like the DT-315A battery operated strobe, however flash tube life is increased, so maintenance of the DT-315P is less. Equipped with Phase shifting in angle of delay (0-359 degrees) and flash time delay, (0-300 msec) the DT-315P is engineered for checking speed, timing and wear on rotating and reciprocating machinery.
With its rugged "bumper", sealed body, and internal (rechargeable) battery, the DT-315P provides the maintenance and quality professional, a rugged and accurate strobe-tach for inspection in harsh environments, of presses, conveyers, gear reducers, chain drives, fuel injectors, spray (paint) patterns, and many other industrial applications.

Stroboscope
Stroboscope
Our Price: Contact us for pricing
Phone: 253-927-6186
866-318-6186
Fax: 253-927-6189
email: sales@hotektech.com
Stroboscope Specification
Model DT-315P
Flashing Range 60.0 ~ 3,300 fpm
Display Accuracy ± 0.01 % of reading
Drift ± 0.01 (at 0 ~ 40° C)
Update Time Approx. 0.2 seconds
Output Signal Approx. 12V
Other Functions ÷2, x2 Flashings,
Phase shift adjustment amplitude (approx.), 4.7 KΩ impedance
Flashings Synchronous mode: 60.0 ~ 3,300fpm / Delay mode: 200 ~ 3,300 fpm
Delay Angle Range Delay mode: 0 ~ 359°, Set by 1°
Display rpm, Synchronous mode: 60.0 ~ 3300fpm / Delay Angle,
Delay mode: 0 ~ 359° or 0 ~ 300mS conversion display
Display Accuracy Synchronous mode: ± 0.01% plus ± 1 digit /
Delay mode: + 0 -0.2mS plus ± 1 digit
Update Time 1 / second
Input Signal H Level: 2.5 ~ 12V / L level: 0 ~ 0.4V / 50 μs or over for H.L. level /
Trigger at rising edge / Approx. 10 KΩ impedance
Sensor Power Battery: 6.8 ~ 11.0V /
Adapter: 10.2 ~ 12.2V /
DC: 9 ~ 14.5V : 7.8 ~ 14.1V / max. 40mA (including max 0.6V Ripple)
Display 5 digit, 7 segment red LED (Character height 10mm)
Setter Flashing, Delay angle: Jog Shuttle / Mode, Display Unit: Tact Switch
Flashtube Xenon lamp Flashtube 311-2
Flashtube Power max. 10W
Flash Duration Approx. 30 μ sec
Power Battery: NiCad battery, 8KR - 2000 sce SANYO,
Operating time: Approx. 1 hour (full charge at 3000 fpm) /
Battery charge time: Approx. 10 hours /
Do not operate over 10 hours continuously (External power: Disconnect the built-in battery before operating instrument by external power) /
DC 9V - 14.5V, Max. 24W (current consumption is 24W/input voltage) operate by provided adapter / AC115V 10%, 50/60 Hz max. 40VA
Operating Temperature 0 - 40°C
Dimensions 5.11" W x 6.22" H x 10.20" L (130 W x 158 H x 259 L mm)
Weight Approx. 4.6 lbs (2.1 kg)
Power Plug PJ-2 (Sato parts) or the equivalent
Accessories Input/Output signal plug, AC adapter, flash tubes
Optional Accessories NIST traceable certificate

Please email sales@hotektech.com or call 253-927-6186 if you are interested in a purchase, or
  need additional information.

[Home] [Top] [Distribution] [Contact Us]