| Model |
DT-326 |
| Units of measure |
FPM (flashes per minute) or Hz
(frequency) |
|
Measuring range |
1 - 2,000Hz |
| 60 - 120,000 FPM |
| Accuracy |
+/-0.02% (at 73°F [23°C]) |
|
Resolution
of flash rate
setting in
internal
mode |
Unit;
Hz |
Measuring
range:
1-200 Hz |
0.01Hz |
|
Measuring
range:
1-2000 Hz |
0.1Hz |
|
Unit;
FPM |
Measuring
range:
60 - 12,000 FPM |
60.0 - 3,000.0 : 0.1 FPM
3,000.2 - 6,000.0 : 0.2 FPM
6,000.5 - 12,000.0 : 0.5 FPM |
|
Measuring
range:
60 - 120,000
FPM |
60 - 30,000 : 1 FPM
30,002 - 60,000 : 2 FPM
60,005 - 100,000 : 5 FPM
100,010 - 120,000 : 10 FPM |
| Flashing time (Duty) |
0.1° - 2.5°/360° setting can be
changed by 0.1° increments |
| Mode |
Internal |
Set and change
flashing rate |
Change flash rate by using dial,
or “×2” and “1/2” key |
| Phase Shift |
Forward/backward by 3°
increments |
| Unit change |
“FPM” or ”Hz” |
|
External
trigger
|
Flash rate
(Input frequency) |
1 – 166 Hz
60 – 10,000 FPM |
| Input pulse width |
More than 50 us |
| Unit change |
“FPM” or ”Hz |
|
Parameter
setting
|
Measuring range |
1 - 2000Hz (60 - 120,000 FPM) range or
1 - 200Hz (60 - 12,000 FPM) |
| Trigger Edge |
Positive or Negative edge |
| Delay time/angle |
Delayed time : 0 - 999ms *1
Delayed angle : 0 - 359° *1 |
| Back light |
Selectable- ON or OFF |
|
Power Saving
Function |
Flash (Auto off) |
Stop flashing automatically
after 2 min. |
| Back light (Auto
off) |
Turn off after 2 minutes of
inactivity. |
| Power (Auto off) |
Power off unit after approx. 5
minutes in stand-by mode |
|
Input/Output (I/F) |
External Trigger
Input |
Photo Coupler Input, Current
12mA (approx.) |
| External Trigger
output |
Photo Coupler (Open collector) Output
Voltage: DC30V or less, Current: 30mA or less,
Pulse width: approx.200us |
| Sensor Power Supply |
DC12V/max.40mA |
| Display |
LCD |
6 digits (main), 5 digits (sub) |
| “LOW BAT”, “Setting item”,
“Unit” |
| Back light |
Yellow green LED |
| Flashing
part |
Flash Source |
Super High Brightness White LED
5500K (typ) |
| Life time |
More than 1500 hours (approx.
5X108 times at 6000 FPM) |
|
Luminance
(typ value)
*2 |
Normal
mode |
20cm | 6,000FPM |
About 1300 lx |
| 50cm | 6,000FPM |
About 200 lx |
|
ECO
mode |
20cm | 6,000FPM |
About 400 lx |
| 50cm | 6,000FPM |
About 100 lx |
| Power
supply |
Battery |
Alkaline AA battery (1.5V×4pcs)
*3 |
| AC adapter |
DC5V / 2.0A |
| Charge function |
None |
|
Continuous
Flashing *2 |
Approx. 20 minutes (Flashing with AA battery in
normal
mode)
Approx. 80 minutes (Flashing with AA battery in ECO mode) |
| Temperature Range |
32 - 95°F [ 0 - 35°C] |
| Operating humidity
limits |
35 – 38 % RH |
| Use Environment |
No dust, No corrosive gas |
| Resistance of
Environment |
No water-proof/explosion
protection and non-RoHS |
| Standards |
CE |
| Weight |
About 500g (include batteries) |
| Housing Material |
Aluminum |
| Accessories |
AC adapter
Connection port for External output
Carrying case, Alkaline AA battery (1.5V×4pcs) |
| Option Accessories |
Input/ Output cable adaptor |
