| Model |
DT-329 |
| Units of measure |
FPM
(flashes per minute) or Hz (frequency) |
|
Measuring range |
1 -
2,000Hz |
| 60 -
120,000 FPM |
| Accuracy |
+/-0.02%
(at 73°F [23°C]) |
|
Resolution
of flash rate
setting in
internal
mode |
Unit;
Hz |
Measuring
range:
1-200 Hz |
0.01Hz |
|
Measuring
range:
1-2000 Hz |
0.1Hz |
|
Unit;
FPM |
Measuring
range:
60 - 12,000 FPM |
60.0 - 3,000.0 : 0.1 FPM
3,000.2 - 6,000.0 : 0.2 FPM
6,000.5 - 12,000.0 : 0.5 FPM |
|
Measuring
range:
60 - 120,000
FPM |
60 - 30,000 : 1 FPM
30,002 - 60,000 : 2 FPM
60,005 - 100,000 : 5 FPM
100,010 - 120,000 : 10 FPM |
| Flashing time (Duty) |
0.1° -
2.5°/360° setting can be changed by 0.1° increments |
| Mode |
Internal |
Set and change
flashing rate |
Change
flash rate by using dial, or “×2” and “1/2” key |
| Phase Shift |
Forward/backward by 3° increments |
| Unit change |
“FPM” or
”Hz” |
|
External
trigger |
Flash rate
(Input frequency) |
1 – 166 Hz
60 – 10,000 FPM |
| Input pulse width |
More
than 50 us |
| Unit change |
“FPM” or
”Hz |
|
Parameter
setting |
Measuring range |
1 - 2000Hz (60 - 120,000 FPM) range or
1 - 200Hz (60 - 12,000 FPM) |
| Trigger Edge |
Positive
or Negative edge |
| Delay time/angle |
Delayed time : 0 - 999ms *1
Delayed angle : 0 - 359° *1 |
|
Power Saving
Function |
Flash (Auto off) |
Stop
flashing automatically after 2 min. |
| Back light (Auto
off) |
Turn off
after 2 minutes of inactivity. |
| Power (Auto off) |
Power
off unit after approx. 5 minutes in stand-by mode |
|
Input/Output (I/F) |
External Trigger
Input |
Photo
Coupler Input, Current 12mA (approx.) |
| External Trigger
output |
Photo Coupler (Open collector) Output
Voltage: DC30V or less, Current: 30mA or less,
Pulse width: approx.200us |
| Sensor Power Supply |
DC12V/max.40mA |
| Display |
LCD |
6 digits
(main), 5 digits (sub) |
| “Setting
item”, “Unit” |
| Back light |
Yellow
green LED |
| Flashing
part |
Flash Source |
Super
High Brightness White LED 5500K (typ) |
| Life time |
More
than 1500 hours (approx. 5X108 times at
6000 FPM) |
|
Luminance
(typ value) |
20cm | 6,000FPM |
About
1250 lx |
| 50cm | 6,000FPM |
About
700 lx |
| 20cm | 120,000FPM |
About 1950 lx |
|
| Flash Area |
About
23.62in x 15.75in (600mm x 400mm) |
| Power supply |
AC100 -
240V (50Hz/60Hz) |
| Temperature Range |
32 -
95°F [ 0 - 35°C] |
| Operating humidity
limits |
35 – 38
% RH |
| Use Environment |
No dust,
No corrosive gas |
| Resistance of
Environment |
No
water-proof/explosion protection and non-RoHS |
| Standards |
CE |
| Weight |
About
11lbs (5 kg) |
| Housing Material |
Steel |
| Accessories |
AC adapter
Connection port for External input
Connection port for External output |
