Toll Free: 866-436-2430                     Email: sales@hotektech.com

ARINC 429 INTERFACE CARD

The PC4/T2/R2 ARINC 429 Interface card is a one third length PC ISA interface card comprising of two independent transmitters, two independent receivers, one microprocessor, on board Time Tag Generation, 28 volt Event input, Real Time Data Acquisition FIFO's, and Dual Port memory. 
The Dual Port RAM is the common interface between the PC Bus and the PC Card. 
The receivers perform on card filtering by Label (TAG) in Octal and SDI. The receivers independently adapt to the Bus Data rates that they are connected to. 
This information is also available to the operator.

PRODUCT SPECIFICATION:

• Two independent transmit and two independent opto-coupled receive channels.
• All data filtered on card by Channel, TAG and SDI parameters.
• Dual Port RAM interface for holding transmit sequence and ARINC 429 Rx filter tables.
• 8 KiloBytes of on board FIFO memory for buffering received data.
• 28 volt opto-coupled Event input for marking data during data acquisition.
• 28 bit 1mS resolution Time Tag register for timing incoming data and Events.
• Independent High/Low data rate selection for each transmitter.
• Automatic high/low speed adaptation on received data for each channel with indication.
• Interrupt and polling capabilities of data acquisition FIFO's.
• One third length 8 bit ISA card.
• Application Program Interface (API in 'C') available with source code.
• Connection via 37-way D connector.
• Power: +5 volt @ 600mA, +/-12 volt @ 100mA.
• Commercial operating temperature range 0 to 70 deg. C.