Phone: 253-927-6186
 Email: sales@hotektech.com
Home > Avionics Databus analyzer converter > DATAIR-400/M3(V2) ARINC 429 analyzer

The DATAIR-400/M3(V2) is the next generation of the previous DATAIR-400/TR ARINC 429 handheld Arinc 429 analyzer. The DATAIR-400/M3(V2) is aimed at providing the user with an easy to use first line diagnostic tool for testing and troubleshooting ARINC 429 avionics systems. It allows the user to connect to an ARINC 429 data bus and easily view the active ARINC 429 Labels on the bus or to generate up to 150 ARINC 429 test words to simulate a specific test. The receiver will automatically adapt to and display the bus bit rate.

DATAIR-400 ARINC Analyzer

Model  Description 
DATAIR-400/M3(V2)  ARINC 429 Analyzer. Handheld ARINC 429 analyzer.
DATAIR-400/M3+  ARINC 429 Data Analyzer. Handheld ARINC 429 Tester

The DATAIR-400/M3(V2) ARINC 429 Tester is a Hand Held unit that comprises an 8 line by 21 character backlit LCD, an alphanumeric keypad, a microprocessor controlled ARINC 429 receiver, transmitter board with a detachable rechargeable battery pack.

The DATAIR-400/M3(V2) features data entry in engineering units format for transmitted ARINC 429 data. Data values for up to 150 labels can be entered and the values and configuration can be stored in one of ten user profiles for easy and fast recall for different projects.

Standard labels held in non-volatile ROM can be recalled and saved as custom labels if required. These special labels can override the standard definitions if required. These custom labels can be suspended or deleted altogether if they are no longer required. The customised labels are also separated by the Hex ID - Equipment Identifier as there can be multiple different definitions of the same label value.

We provide a software utilty for users that would prefer to define their custom engineering unit Labels on a PC.

Receiver:
Label search of active ARINC 429 labels
Bus monitor displaying Bus Speed (“Hi” (100kHz) or “Lo” (12.5kHz), SSM, SDI, bits 29 ~ 11 in binary and hexadecimal, Parity and Label rate in mS.
Bus monitor displaying selected label in engineering units (BCD and BNR).
Automatic reception of Lo or Hi ARINC 429 bit rates
Standard ARINC 429-15 Label definitions for Rx included - selection by Equipment ID code.
User definable and custom ARINC 429 label definitions – with save, suspend or delete.
Automatic preservation of setup between power downs
Opto-coupled isolated inputs


Transmitter:
Standard ARINC 429-15 Label definitions for Tx included - selection by Equipment ID code.
User definable and custom ARINC 429 label definitions – with save, suspend or delete.
Up to 10 Transmitter profiles for saving various configurations for use in the Lab / Workshop.
Data entry in binary, Hexadecimal or engineering Units (BCD and BNR)
On/Off toggling of individual data bits 11 through 29
Editable SSM field values.
Editable Parity.
Editable Inter-Word Gap (IWG) from 2-bits to 255-bits
Metric / Imperial units setting
Parity setting: ODD/EVEN/NONE
Real time update of transmitted data
Transmission of up to 150 labels at user selectable repetition rates.
Individual label transmission interval (10,20,50,100,200,500 and 1000 mS) word rates
Single shot mode
Selectable (Lo, Mid (50kbps) or Hi speed) bit rate
Non-volatile memory storage

Other features:
An 8-line by 21-character backlit display with 1 minute timeout.
Rechargeable detachable battery, 8 hour life on single charge
Low Battery warning on LCD.
Can be powered from an external 6V DC power adapter
Standard D9 plug connector with supplied test leads for connecting to ARINC 429 busses
Alphanumeric keypad for data entry
Custom Label definitions
Imperial or Metric scaling switch for engineering units.
The software on the unit can be upgraded via USB/RS232 using supplied cable.
Flite case available with pre-cut foam to hold the instrument and accessories
Full EMC Compliance to European (CE) directive.
Weight: 750g (with batteries fitted).
External supply: 4 to 7.5 volts DC. 350mA at 4V, 160mA at 7.5V
External DC Connector: 3.5mm Jack. Note: The Tip of the Plug is +6V.
Environmental: 0 to 50 ºC (operating).

We accept
  • American Express
  • Master Card
  • VISA
  • Purchase Orders
Company
Hotek Technologies, Inc
tel: 253-927-6186
sales@hotektech.com
services@hotektech.com
info@hotektech.com