Phone: 253-927-6186
 Email: sales@hotektech.com
Home > Calibrators > Gauge with Dual SPDT Alarms Relays > F16DAR gauge with transmitter and relays

F16DAR Digital Pressure Gauge with Dual SPDT Alarms, and 4-20 mA or 0-2 V Analog Output.
Alarms may be configured to operate in fixed deadband mode or adjustable hysteresis mode.
In the fixed deadband mode, the alarm set/reset point deadband is factory set to 1% of full-scale.
Each alarm may be configured as either HI or LO with a user adjustable alarm set point for each relay.
In the adjustable hysteresis mode, two independent set and reset trip points are user adjustable for each relay.
The set or reset state at power up when between trip points is user configurable.

Digital pressure gauge F16DAR

Model  Description 
F16DAR  Gauge Dual SPDT Alarms, 4-20 mA or 0-2 V Analog Output

±0.25% Test Gauge Accuracy
316 Stainless Steel Wetted Parts
Bi-Color (Red/Green) Alarm LEDs
Output Test Function
4-20 mA Models Power Current Loop

Accuracy (linearity, hysteresis, repeatability)
Standard: ±0.25% of full scale ±1 least significant digit
“-HA” option: ±0.1% FS ±1LSD (most ranges) or
“-4A” option ±0.4% FS ±1LSD
NIST traceable test report and data optional
Display (update rate, type, size)
3 readings per second nominal display update rate
Ranges up to 1999: 31/2 digit LCD, 1/2" digit height
3000 and 5000 psi ranges: 4 digit LCD, 0.4" digit height

Alarm Outputs.
Programmable dual form C (SPDT) relay contacts for HI/LO, HI/HI, LO/LO, normal or reverse acting
with 1% deadband, or adjustable trip and reset points for each relay, manual or auto acknowledge. 1A/24VDC, 0.5A/115VAC, non-inductive 120 milliseconds typical response time
Analog Retransmission Output.
Updated approximately 16 times per second.
-I: Current output, 4-20 mA DC Output drive (compliance) determined by power source 6,553 counts over sensor range.
-V: Voltage output, 0-2 VDC into 5k ohm or greater 6,553 counts over sensor range.
-BV: Bipolar voltage output (–2 - 0 - 2 V) for bipolar ranges ± 2 VDC into 5k ohm or
greater 13,107 counts over sensor range

F16DAR Pressure gauge specifications
PSIG
3.00 psig
5.00 psig
15.00 psi abs
15.00 psig vac
±15.00 psig
15.00 psig
30.0 psi abs
30.0 psig
60.0 psig
100.0 psi abs
100.0 psig
199.9 psig
300 psig
500 psig
1000 psig
1999 psig
3000 psig
5000 psig

inHg
6.00 inHg
10.00 inHg
30.0 inHg abs
30.0 inHg vac
±30.0 inHg
30.0 inHg
60.0 inHg abs
60.0 inHg
120.0 inHg
199.9 inHg abs
199.9 inHg

torr abs
760.0 torr abs
 
oz/in²
50.0 oz/in2
80.0 oz/in2
240 oz/in2
mmHg
150.0 mmHg
250 mmHg
760 mmHg abs
760 mmHg vac
760 mmHg
1500 mmHg abs
1500 mmHg

inH2O
85.0 inH2O
140.0 inH2O
400 inH2O abs
400 inH2O vac
±400 inH2O
400 inH2O
850 inH2O

ftH2O
7.00 ftH2O
12.00 ftH2O
35.0 ftH2O
70.0 ftH2O
140.0 ftH2O
230 ftH2O
500 ftH2O
 
1999 mmH2O
 
199.9 cmH2O
350.0 cmH2O
1000 cmH2O
1999 cmH2O

mbar
199.9 mbar
350.0 mbar
1000 mbar abs  
mbar
±1000 mbar
1000 mbar
1999 mbar abs
1999 mbar

bar abs
1.000 bar abs
1.000 bar
1.999 bar abs
1.999 bar
4.00 bar
7.00 bar abs
7.00 bar
14.00 bar
19.99 bar
35.0 bar
70.0 bar
140.0 bar
199.9 bar
350 bar

kPa
19.99 kPa
35.0 kPa
100.0 kPa abs
100.0 kPa vac
100.0 kPa
199.9 kPa abs
199.9 kPa
400 kPa
700 kPa abs
700 kPa
1500 kPa
1999 kPa

MPa
3.50 MPa
7.00 MPa 
14.00 MPa
19.99 MPa
35.0 MPa

g/cm²
1000 g/cm2 abs
1000 g/cm2
1999 g/cm2 abs
1999 g/cm2

kg/cm²
±1.000 kg/cm2
1.000 kg/cm2 abs
1.000 kg/cm2
1.999 kg/cm2 abs
1.999 kg/cm2
4.00 kg/cm2
7.00 kg/cm2 abs
7.00 kg/cm2
14.00 kg/cm2
19.99 kg/cm2
35.0 kg/cm2
70.0 kg/cm2
140.0 kg/cm2
199.9 kg/cm2
350 kg/cm2

atm
1.000 atm
4.00 atm
7.00 atm
14.00 atm
19.99 atm
35.0 atm
70.0 atm
135.0 atm
199.9 atm
340 atm 

Size
3.38"W x 2.88"H x 1.65"D (not including pressure fitting or cable strain relief).
Add approximately 0.75" to height for pressure fitting and 1" to depth for strain relief and wire clearance.
Weight (approximate)
Gauge: 9 ounces, Shipping weight: 1 pound
Material
Extruded aluminum case, epoxy powder coated
Polycarbonate cove. Front and rear gaskets
Color
Light gray body, light gray/blue front
Pressure/Vacuum Connection and Material
1/4" NPT male, 316 stainless steel
Media Compatibility
All wetted parts are 316 SS
Compatible with most liquids and gases
Overpressure
5000 psig for 3000 psig range
7500 psig for 5000 psig range
All others 2x rated pressure minimum
Burst Pressure
4x rated pressure minimum or 10,000 psi, whichever is less

We accept
  • American Express
  • Master Card
  • VISA
  • Purchase Orders
Company
Hotek Technologies, Inc
tel: 253-927-6186
sales@hotektech.com
services@hotektech.com
info@hotektech.com