HD 2103.1 Anemometer Thermometer for air speed measurement which use hot-wire or vane probes,
for temperature Pt100 sensor, measuring range -200°C +650°C. Storage of maximum, minimum, average
value, RS232 C output for data transfer in real time to a PC or printer. Functions: REL, HOLD and auto power.
IP 67 protection degree.
HD 2103.2 Anemometer Thermometer for air speed measurement which use hot-wire or vane probes,
for temperature Pt100 sensor, measuring range -200°C +650°C. Datalogger which stores the maximum, minimum, average value and can store up to 80.000 samples. RS232C/USB output for data transfer in real time to a PC or printer. Functions: REL, HOLD and auto power off which can be disabled.
Measuring units °C - °F - m/s - km/h - ft/min - mph - knot - l/sm3/s - m3/min - m3/h - ft3/s ft3/min - WCT
Anemometer Thermometer
| Model | Description |
|---|---|
| HD 2103.1 | Anemometer Thermometer for air speed measurement |
| HD 2103.2 | Anemometer Data Logger for air speed measurement |
The HD2103.1 and HD2103.2 are portable instruments with a large LCD display. They are designed for use in the fields of air conditioning, heating, ventilation and environmental comfort. They use hot-wire or vane probes to measure air speed, flow rate, and temperature inside pipelines and vents. Temperature only is measured by immersion, penetration or air contact probes. The temperature sensor used can be chosen from the Pt100, Pt1000 or Ni1000. The probes are fitted with the SICRAM module, with the factory calibration settings already being memorized inside.
The HD2103.2 instrument is a datalogger.
It memorizes up to 38,000 samples which can be transferred from the instrument connected to a PC via
the multi-standard RS232C serial port and USB 2.0.
The storing interval, printing, and baud rate can be configured using the menu.
The HD2103.1 and HD2103.2 models are fitted with an RS232C serial port and can transfer the acquired measurements in real time to a PC or to a portable printer.
The Max, Min and Avg function calculate the maximum, minimum or average values.
Other functions include: the relative measurement, REL, the HOLD function, and the automatic turning
off that can also be disabled.
Measurement of temperature by Instrument
Pt100 measurement range -200°C - +650°C
Pt1000 measurement range -200° - C+650°C
Ni1000 measurement range -50°C - +250°C
Resolution 0.1°C
Accuracy ±0.1°C
Drift after 1 year 0.1°C/year
ORDER CODES
HD2103.1: The instrument HD2103.1, connection cable for serial output HD2110CSNM, 4 1.5V alkaline batteries, operating manual, case and DeltaLog9 software.
The probes must be ordered separately.
HD2103.2: The kit is composed of the HD2103.2 datalogger, connection cable HD2101/USB,
4 1.5V alkaline batteries, operating manual, case and Delta-Log9 software.
The probes must be ordered separately.
HD2110CSNM: 8-pole connection cable MiniDin - Sub D 9-pole
female for RS232C.
HD2101/USB: Connection cable USB 2.0 connector type A - 8-pole MiniDin.
DeltaLog9: Software for
download and management of the data on PC using Windows 98 to XP operating systems.
AF209.60: Stabilized power supply at 230Vac/9Vdc-300mA mains voltage.
Sprint-BT: On request, portable, serial input, 24 column thermal printer, 58mm paper width.
Hot-wire probes:
AP471 S1: Hot-wire telescopic probe, measuring range: 0
- 40m/s. Cable length 2 metres.
AP471 S2: Omni directional hot-wire probe, measuring range: 0
- 5m/s. Cable length 2 metres.
AP471 S3: Hot-wire telescopic probe with terminal tip for easy position, measuring range: 0
- 40m/s.
Cable length 2 metres.
AP471 S4: Omni directional hot-wire telescopic probe with base, measuring range: 0
- 5m/s.
Cable length 2 metres.
AP471 S5: Omni directional hot-wire telescopic probe, measuring range: 0
- 5m/s.
Cable length 2 metres.
Vane probes:
AP472 S1L: Vane probe with thermocouple, Φ 100mm. Speed from 0.6 to 20m/s.
Temperature from -25 to 80°C. Cable length 2 metres.
AP472 S1H: Vane probe with thermocouple, Φ 100mm speed from 10 to 30m/s.
Temperature from -25 to 80°C. Cable length 2 metres.
AP472 S2: Vane probe, Φ 60mm. Measurement range: 0.25
- 20m/s. Cable length 2 metres.
AP472 S4L: Vane probe, Φ 16mm. speed from 0.6 to 20m/s. Cable length 2 metres.
AP472 S4LT: Vane probe with thermocouple, Φ 16mm, speed from 0.6 to 20m/s.
Temperature from -30 to 120°C with thermocouple K sensor(*). Cable length 2 metres.
AP472 S4H: Vane probe, Φ 16mm speed from 10 to 50m/s. Cable length 2 metres.
AP472 S4HT: Vane probe with thermocouple, Φ 16mm speed from 10 to 50m/s.
Temperature from -30 to 120°C with thermocouple K sensor(*). Cable length 2 metres.
Temperature probes:
TP472I: Immersion probe, Pt100 sensor. Stem Φ 3 mm, length 300 mm.
Cable length 2 metres.
TP472I.0: Immersion probe, Pt100 sensor. Stem Φ 3 mm, length 230 mm.
Cable length 2 metres.
TP473P.0: Penetration probe, Pt100 sensor. Stem Φ 4mm, length 150 mm.
Cable length 2 metres.
TP474C.0: Contact probe, Pt100 sensor. Stem Φ 4mm, length 230mm, contact
surface Φ 5mm.
Cable length 2 metres.
TP475A.0: Air probe, Pt100 sensor. Stem Φ 4mm, length 230mm.
Cable length 2 metres.
TP472I.5: Immersion probe, Pt100 sensor. Stem Φ 6mm, length 500 mm.
Cable length 2 metres.
TP472I.10: Immersion probe, Pt100 sensor. Stem Φ 6mm, length 1000mm.
Cable length 2 metres.
TP875: Globe thermometer Φ 150 mm with handle, complete with SICRAM
module. Cable length 2 metres.
Temperature probes without SICRAM module
TP47.100: 4 wire direct Pt100 sensor immersion probe,. Probes stem Φ 3mm,
length 230mm.
Connection cable 4 wires with connector, length 2 metres.
TP47.1000: Pt1000 sensor immersion probe. Probes stem Φ 3mm, length
230mm.
Connection cable 2 wires with connector, length 2 metres.
TP47: Only connector for probe connection: direct 4 wires Pt100 and 2 wires Pt1000.