HD2124.1 Manometer Thermometer with two inputs. Temperature measurement with Pt100 probe.
Measuring range -200°C +650°C. Storage of maximum, minimum, average value and the difference
between the two inputs, RS232 C output for data transfer in real time to a PC or printer. Peak function
detects the presence of pressure peaks, other functions: REL, HOLD and auto power off. which can be
disabled, IP 67 protection degree.
HD2124.2 Manometer Thermometer data logger with two inputs. Temperature measurement with Pt100
probe.
Measuring range -200°C +650°C. Data logger which stores the maximum, minimum, average value
and
can store up to 32.000 couple of samples. RS232 C/USB output for data transfer in real time to a PC or
printer.
Functions: REL, HOLD and auto power off.
Measuring unit °C - °F - Pa - hPa - mbar - bar - atm - mmHg - mmH2O - kgf/cm2 - PSI - inchHg
Manometer - Thermometer
Model | Description |
---|---|
HD 2124.1 | Manometer-Thermometer with two inputs |
HD 2124.2 | Manometer-Thermometer with two inputs. Data Logger. |
These are portable instruments with a large LCD display.
They perform measurements of absolute, relative and differential pressure, and temperature.
The PP471 electronic module is used to measure the pressure. The PP471 electronic module works as an
interface between the instrument and the TP704 and TP705 series probes.
The temperature is detected with immersion, penetration, contact or air Pt100 probe with SICRAM module or
4 wire direct Pt100 probe.
The temperature probes are fitted with SICRAM module and the factory calibration settings are already
memorized inside. Upon turning on the instrument automatically detects them.
INSTRUMENT TECHNICAL CHARACTERISTICS
Instrument
Dimensions (Length x Width x Height) 185x90x40mm
Weight 470g (complete with batteries)
Materials ABS, rubber
Display 2x41⁄2 digits plus symbols
Visible area: 52x42mm
Operating conditions
Operating temperature -5° to 50°C
Storage temperature -25° to 65°C
Working relative humidity 0 - 90%RH without condensation
Protection degree IP67
Power
Batteries 4 1.5V type AA batteries
Autonomy 200 hours with 1800mAh alkaline batteries
Power absorbed with instrument off 20μA
Mains - model HD2114P.2 Output mains adapter 9Vdc / 250mA
Units °C - °F - Pa - mbar - mmH2O - PSI - m/s - km/h - ft/m - mph - knot - l/s - m3/h - cfm
ORDER CODES
HD2124.1: The kit is composed of the instrument HD2124.1, SICRAM interface module PP471,
connection cable for serial output HD2110CSNM, 4 1.5V alkaline batteries, operating manual, case and
DeltaLog9 software. The probes must be ordered separately.
HD2124.2: The kit is composed of the instrument HD2124.2 datalogger, SICRAM interface module PP471,
connection cable HD2101/USB, 4 1.5V alkaline batteries, operating manual, case and DeltaLog9 software.
The probes must be ordered separately.
HD2110CSNM: 8-pole connection cable MiniDin - Sub D 9-pole female for RS232C.
HD2101/USB: Connection cable USB 2.0 connector type A - 8-pole MiniDin.
DeltaLog9:
Software for download and management of the data on PC using Windows 98 to XP operating systems.
AF209.60: Stabilized power supply at 230Vac/9Vdc-300mA mains voltage.
Sprint-BT: On request, portable, serial input, 24 column thermal printer, 58mm paper width.