Phone: 253-927-6186
 Email: sales@hotektech.com
Home > Instruments > Stroboscope > DT-725 Digital Stroboscope

The DT-721 and DT-725 Digital Stroboscope is packed with many of the same features as our
famous DT-300 series stroboscopes, but are lighter in weight.
Constructed of strengthened high impact plastic, these rugged stroboscopes are exceptionally reliable
and withstand the same harsh conditions as more expensive units.
Both stroboscopes are sold separately or as a convenient kit.
The DT-721/DT-725KIT contains a strobe tachometer, extra flash bulb, charger (model DT-725only)
and rugged carrying case.

DT-721 Digital Stroboscope

Model  Description 
DT-721  Digital Stroboscope  (115VAC)
DT-721  Digital Stroboscope (220 VAC, 50/60 Hz) 
DT-725  Digital Stroboscope  (115VAC Charger)
DT-725  Digital Stroboscope (220 VAC, Charger 
DT-725-FAST Digital Stroboscope (115 VAC, Fast Charger) 

Plastic housing with strength members
Lightweight design
Phase shift (in degrees)
Continuous duty flash bulb
External trigger
Slave functions
Bright LED display
Unique rotary pulse indicator
Manual flash controller knob
1/4 x 20 mounting hole

DT-721 Digital Stroboscope
Model  DT-721(AC) / DT-725(Internal Battery) / DT-721/725 KIT 
Flashing Range  40.0 - 12,500 fpm (flashes per minute) 
Accuracy  ± 0.02 % of reading 
Resolution  0.1 fpm: 40.0 - 4,999.9 fpm
0.2 fpm: 5,000 - 7,999.9 fpm
0.5 fpm: 8,000.0 - 9,999.5 fpm
1 fpm: 10,000 - 12,5000 fpm 
Phase Shift  Use +/- push buttons (360° in 6 seconds) 
Display Update Time  Ext. mode : varies with flashing rate 
Output Signal  NPN open collector (24 VDC max., 50 mA), 150 μsec typical 
Rate Multiplier Divider  Multiply by 2, divide by 2 
External Trigger Input Signal  a) 12 - 24 VDC thru a 3-wire NPN output sensor
(requires external power Signal supply)
b) 12 VDC thru a 2-wire proximity sensor (leakage current
1 mA max., load current 8 mA min.)
c) Switch or relay contact 
Display  5 digits, 0.3" (8 mm) high, LED 
Flash Tube
Power/Life 
Xenon, 10 W max. (100 million flashes) 
Flash Duration  10 - 15 μsec 
Sensor Power Supply  12 VDC (40 mA) 
Low Battery Indicator  N/A /Flashing LED 
Power Requirement  115 VAC or 220 VAC ± 10 % 60/50 Hz, 30 VA (specify voltage)/ Battery Pack 
Operating Temperature  32° - 104° F ( 0 - 40° C ) 
Weight  1.5 lb (0.7 kg) 
Dimensions  8.98" L x 4.33" W x 8.54" H (228 mm x 110 mm x 217 mm),
including handle 
Warranty  1 year 
Optional Accessories  Fast charger, Carrying case, Flashtubes, SAS-DT300 Flexible
swing arm, NIST traceable certificate 
We accept
  • American Express
  • Master Card
  • VISA
  • Purchase Orders
Company
Hotek Technologies, Inc
tel: 253-927-6186
sales@hotektech.com
services@hotektech.com
info@hotektech.com