pH meter with printer.
CP-502 Laboratory pH-meter with printer set with pH electrode.
Laboratory meters in benchtop housing, powered with 9V power adapter.
Accurately measure: pH,
Redox (mV) and temperature.
Depending on the kind of used electrode they may be used for clean water,
sewage, soil measurements etc.
The CP-502 meters have built in thermal printer.
Calibration: 1 ÷ 5 points.
Automatic buffer detection,
heir value may be changed by the user.
Automatic correction of the temperature influence on sample
solution (NIST) value.
pH meter
| Model | Description |
|---|---|
| CP-502 | Laboratory pH-meter with printer set with pH electrode. |
Automatic checking of the condition of electrode’s membrane.
Both models have an internal clock with date.
Internal datalogger for up to 200 sets of results collected in series or single with temperature
time and date.
The results and calibration data are stored in non-volatile memory.
RS-232 output for connecting with a PC and Centronics for standard printer.
24 months warranty for the meter, 12 for the electrodes.
| Function | pH | mV | ° C |
| Range | -2.000 ÷ 16.000 pH | ± 1000 mV | -50.0 ÷ 199.9 ° C |
| Resolution | 0.001 pH or 0.01 pH | 0.1 mV | 0.1 ° C |
| Accuracy (± 1 digit) | ± 0.002 pH | ± 0.1 mV | ± 0.1 ° C* (meter) |
| Input impedance | 10Exp12 Ω | ||
| Compensation range | -5 ÷ 110.0 ° C | ||
| Dimensions (mm) | L = 200, W = 180, H = 20 / 50 | ||
*The total error of temperature measurements depends on the kind of used probe