METRACLIP 64 Milliampere Current Clamp on meter.
The current clamp is connected to the measuring instrument by
means of a cable with a length of 1.2 meters. This allows for
measurement at difficult to access locations.
Currents as of a value of 1 mA.
It’s equipped with a power saving circuit, a data interface, indication of exceeded measuring ranges and a
flexible current sensor, and can be used even under very unfavorable mechanical conditions.
A data logger can be connected to the measuring instrument (e.g.
a multimeter with memory).
This makes it possible to record
measurements which last for several hours.
Digital Clamp On Meter
Model | Description |
---|---|
METRACLIP 64 | Milliampere Current Clamp on meter. |
Measuring ranges:
- DC 100 mA / 1000 mA
- AC 100 mA / 1000 mA / 10 A
Switching back and forth between DC and AC measurements.
Zero balancing for DC measurements.
Measured value storage (DATA HOLD).
Power saving circuit.
Current clamp with 1.2 meter cable length.
Clip opening 5 mm Ø.
Connector sockets for data logger (max. output: 100 mV DC)