Liquid Calibration Baths.

ISOCAL 6 Calibration Bath, Hyperion & Drago Models

Hyperion 936 Liquid Bath. Temperature range 45 below ambient to +140°C
(absolute minimum -45°C).
Drago 934 Liquid Bath. Temperature range +30°C to +250°C in an ambient of 25°C or below.

Hydra series calibration bath

Liquid Calibration Baths, -80°C to 300°C (572°F) in Three Models.
Parallel Tube Action - Liquid flows up the rear volume of the bath and down the working volume. This action creates very small vertical and axial gradients. Enabling the smallest overall uncertainties.

915 Parallel Tube Liquid Bath.

Parallel Tube Calibration Baths Covering -65°C to 300 °C
Stability of ±0.007 °C
Capable of uncertainties to ±0.0005°C (0.5mK)
Capable of calibrating liquid in glass thermometers, no level adapters required

T-25NL Large Volume Dry Block calibrator and Thermal bath.

An oven-stabilized zener diode internal reference provides an overall output accuracy of ±500 µV and ±25 ppm of the setting with zero drift of ±5 µV/°C and full-scale drift of 4 ppm/°C max.

Orion 796 Deep Immersion Calibration Baths

Deep Immersion Calibration Baths Available in Three Ranges Covering -80°C to 300 °C Stability of ±0.007 °C Over and Under Temperature Protection - protect expensive Water Triple Point (WTP) Cells as well as over temperature conditions

Oceanus 6 - P.O.T.T.S Temperature Calibrator. Range -25°C to 110°C

The Oceanus-6 can be used as a Dry Block, a Liquid Bath, a Blackbody Source for infrared thermometers, a Surface Sensor Calibrator and for performance to a few milliK (0.001°C) ITS-90 Fixed Points.

Ayres 875 Fluidized Calibration Bath. Calibration ± 0.020 to ± 0.035° C at 660° C.

This is the only product capable of covering a very wide temperature range without a change of thermal media.