Humidity Temperature sensor
HIA electronic Humidity Temperature sensor in Polycarbonat case
High precision temperature and humidity
sensor for demanding applications in industrial environments.
The HIA sensor can be only used for the HygroDat 100 system.
A high performance analogue-amplifying-electronic is integrated in the sensor shaft, which converts
accurately
the sensor signal into a standard analogue signal.
Thanks to this modular design the sensor
can be installed up to 100 meters away from the transmitter,
avoiding the use of a special cable and the effect of the cable length on the system accuracy.
HIA humidity sensor
| Model | Description |
|---|---|
| HIA | Humidity Temperature sensor in Polycarbonat case |
HIA sensor specification
| Article No. | 1117245 / 1117247 / 1116934 / 1116935 |
| Measurement range | |
| Humidity | 6%...100 % RH ( protected against saturation ) |
| Temperature | -20 ... +80°C |
| Basic accuracy | |
| Temperature | +/- 0.1K ( 0....70°C ) |
| Humidity | +/- 0.5% RH ( 10....95% RH / 0.....50°C ) |
| Basic resolution | 0.1% RH / 0.1K |
| Typical repeatability | < 0.2% RH / < 0.1K |
| Operation temp. | -20 ... +80°C |
| Power consumption | Typ. 19 mW ( worst case 35.5 mW ) |
| Analogue output signal | Integrated signal processing and compensation |
| Storage temperature | Sensor probe 0 ... 60°C ( not condensing ) |
| CC-1 cell 0 ... 60°C ( not condensing ) | |
| Electric connection system | 5-wire installation cable up to 100m not shielded ! |
| IP-protection | IP 65 |