Phone: 253-927-6186

OCEANUS 6 POTTS System Dry block Calibrator.

Oceanus-6 Dry Block Liquid Bath Blackbody Calibrator Range -25°C to 140°C

The Oceanus-6 Dry Block Temperature Calibrator has all the advantages of the Isocal-6 models but
with a substantially larger calibration volume, 2 inch diameter by 11.8 inches deep (52mm Ø x 300mm).
The Oceanus-6 can be used as a Dry Block, a Liquid Bath, a Blackbody Source for infrared thermometers,
a Surface Sensor Calibrator and for performance to a few milliK (0.001°C) ITS-90 Fixed Points.
Like all Isotech calibrators Oceanus-6 is available in two models, the BASIC (B) version with one controller,
and the SITE (S) version with onboard secondary display for high accuracy digital probe matching.


Model  Description 
580  OCEANUS 6 POTTS System; Basic model with standard insert
580-SITE  OCEANUS 6-SITE POTTS System; with Indicator, Insert
Universal Input Temperature Indicator Included in S Model to allow for programming of up to
five “correction” points
ITS-90 Fixed PointsCan be used with the Gallium and Triple Point of Water Fixed Point Cells
Dry or Liquid Bath
Windows Software and PC Interface
 High Capacity Deep Block for Very Long Thermometers
Ideal for Laboratory Comparison and Fixed-Point Calibrations
Includes as standard: Windows Software, Computer Interface and a Ramp to Set Point Feature.
Increased resolution of ±0.01 available throughout the range via the PC interface and
from -19.99 to +99.99 locally on the auto-ranging front display.

The controller features multi-point block to display correction providing excellent absolute accuracy.
The SITE model has a universal sensor input allowing Platinum Resistance Thermometers,
Thermocouples (Types K, N, R, S, L, B, PL2, T, J and E) along with Linear Process Inputs including
4-20mA current transmitters to be displayed on the indicator.
The indicator can be programmed with up to five calibration points to provide high accuracy digital
probe matching. The indicator and controller are both addressable over the communications link.

Low-Temperature Infrared Calibrator specification
Temperature Range  45°C below ambient to +140°C 
Absolute Minimum Temperature  -45° C 
Absolute stability
over 30 minutes 
Metal Block Bath:
Stirred Liquid Bath:
Ice/Water Bath:
Black Body Source:
Surface Sensor Calibrator:
ITS-90 Fixed Point Apparatus:  
Stabilization Times  10 minutes 
Calibration Volume  52 dia x 300mm deep 
Uniformity  ± 0.018° C 
Controller Resolution  0.1 to 0.01 (4 digit display) 
Indicator Resolution  0.1 to 0.01 (4 digit display) 
Communications  Supplied as standard with serial interface,
PC adapter cable and Cal Notepad.  
Indicator Units  °C, °F, °K
Supply  110VAC ±10% (50/60 Hz)
300 Watts   
Dimensions  430mm x 310mm x 300mm (HxWxD) 
Weight  37.48 lbs (17kg) 
We accept
  • American Express
  • Master Card
  • VISA
  • Purchase Orders
Hotek Technologies, Inc
tel: 253-927-6186