Phasing Voltmeter
These meters can be used for voltage detection and phasing at capacitance test points, or for voltage
detection and phasing on bare energized conductors (overhead or underground).
The probes can be separated to be used as a voltage sensor or capacitance sensor, making it two units in
one. This saves you both time and money. A five position selector switch mounted on the back of the meter
housing is used to select voltage sensing on capacitance tap or on direct line and phasing on capacitance
tap or direct line or a battery test position
Phasing Voltmeter
| Model | Description |
|---|---|
| 50101-G-01 | Phasing Voltmeter - 0-5kV (Hard Wired) |
| 50101-G-07 | Phasing Voltmeter 0-9kV/9-36kV |
| 50101-G-08 | Phasing Voltmeter 0-9kV/9-36kV w/Hot Sticks |
| 50101-G-09 | Phasing Voltmeter, 0-5kV |
| 50101-G-10 | Phasing Voltmeter 0-25kV w/2 Bushing Adapters |
| 50101-G-11 | Phasing Voltmeter 0-25kV w/2 Bushing Adapters and Hot Sticks |
| 50101-G-12 | Phasing Voltmeter 0-35kV w/2 Bushing Adapters |
| 50101-G-13 | Phasing Voltmeter 0-35kV w/2 Bushing Adapters and Hot Sticks |
| 50101-G-16 | Phasing Voltmeter, 0-50kV |
| 50101-G-17 | Phasing Voltmeter 0-5kV w/Hot Sticks and Bushing Adapters |
| 50101-G-18 | Phasing Voltmeter, 0-40kV |
| 50101-G-19 | Phasing Voltmeter. 0-50kV w/Hot Sticks |
| 50101-G-20 | Phasing Voltmeter, 0-120kV |
| 50101-G-21 | Phasing Voltmeter, 0-40kV w/Hot Sticks |
| Available Accessories |
These Voltage Sensor Phasing Testers each have a single range of 0-25kV for Model 50101-G-02 and
0-35kV for Model 50101-G-05. Both Voltage Sensor Phasing Testers are versatile, lightweight and easy to use.
The Models 50101-G-02 and 50101-G-05 Voltage Sensor Phasing Tester come complete in a foam-lined
carrying case with a 3kV proof test device used to test the instrument for correct operation before and after
each use a vital safety procedure.
The construction of Models 50101-G-02 and 50101-G-05 Voltage Sensor Phasing Tester provide
no exposed
conducting terminals or meter circuitry.
The locking cable connector provides positive contact and is totally
enclosed electrically.
The scale is large enough to be easily read 8 - 10 feet away when mounted on a
suitable hot stick.
Each model comes with an 8-foot phasing cable, 8-foot extension cable, a proof tester
and a sturdy
carrying case as standard equipment.
| Catalog | Description |
| 50118-G-02 | 1/2 Set of Hot Sticks |
| 10104-P-02 | Shepherd’s Hook |
| 10104-P-03 | Probe Tip |
| 30142-P-01 | Shot Gun Adapter |
| 50111-P-01 | Bushing Adapter |
| 10275-P-01 | Universal Adapter |
| 50131-G-01 | C-Clamp for Grounding |