DT-315AEB Stroboscope with power pack.
The DT-315AEB Stroboscope with
external battery pack
is truly portable stroboscope.
The DT-315AEB stroboscope operates independent of line power via an exterior battery pack that can
be carried with a convenient shoulder harness or set down to allow the operator full movement for visual
When fully charged, rechargeable batteries power the strobe for approximately four continuous hours.
The DT-315AEB stroboscope also incorporates the same impressive features as our
DT-311A and DT-315A strobes.
|DT-315AEB||Stroboscope (115VAC Fast Charger)|
|DT-315AEB||Stroboscope (220 VAC, 50/60 Hz Fast Charger)|
Stroboscope is ideally suited for printing inspection, motion
analysis, preventive maintenance
and speed measurement of repetitive motion, our strobes provide timely data on vibrating parts,
leaks, spray patterns and a variety of industrial and scientific operations.
The DT-315AEB stroboscope is extremely easy to operate via its lightweight and compact design,
its rugged metal construction provides unequaled reliability in the harshest environments.
|Flashing Range||40.0 - 35,000 fpm (flashes per minute)|
|Accuracy||± 0.01 % of reading|
|Resolution||0.1 fpm: 40.0 - 5,000 fpm
0.2 fpm: 5,001 - 8,000 fpm
0.5 fpm: 8,001 - 10,000 fpm
1 fpm : 10,001 - 35,000 fpm
|Phase Shift||Use +/- push buttons (360° in 6 seconds)|
|Display Update Time||0.2 seconds approx.|
|Output Signal||Synchronous, 400 μsec.
Pulse output, 0 to +12 VDC amplitude (approx.), 4.7 KΩ impedance
|Rate Multiplier Divider||Multiply by 2, divide by 2|
|Flashing Range||0.0 to 35,000 fpm|
|± 0.01 % ± 1 digit|
|Phase Shift||0 to 359° with 1° resolution|
|Delay Time||0 to 2,000 msec from 40 - 10,000 fpm|
|External Trigger Input Signal||LO level: 0 -0.8 VDC, HI level: 2.5 - 12 VDC or open
pulse width 50 μsec min
|Input Impedance||4.7 KΩ to 12 V / 6.8 KΩ to 0 V|
|Display||5 digits, 0.4" (10 mm) high, LED|
|Xenon, 10 W max. (100 million flashes)|
|Flash Duration||10 - 40 μsec|
|Sensor Power Supply||12 VDC (40 mA)|
|Battery Life||1 - 2 hours depending on flash rate|
|Low Battery Indicator||Display shows all L’s|
|Power Requirement||External battery pack (9.8 - 14.5 VDC, 2.3A)|
|Operating Temperature||32° - 104° F ( 0 - 40° C )|
|Weight||2.5 lb (1.1 kg)|
|Dimensions||7.28" L x 4.72" W x 4.72" H (185 mm x 120 mm x 120 mm)|
|Standard Accessories||External battery pack with charger|
|Optional Accessories||Carrying case, sensors, SG-300 strobe guard, SAS-DT300 flexible swing arm, daisy chain cables, NIST traceable certificate|