T140 Pressure Calibrator Manometer
The T140 Pressure Calibrator
Manometer is available in several ranges:
±
10" H2O, ±
200" H2O and
30, 100, 300 and 3,000 PSI.
Operation of these calibrators is made
easy through the use of a sealed membrane keypad with simple
controls.
When combined with a MECP-100 Hand Pump,
the T140 Pressure Calibrator Kit makes a great package to
handle your pneumatic calibration requirements.
T140 Pressure Calibrator Manometer.
| Model | Description |
|---|---|
| T140 | T-140-10" WC Pressure Calibrator Manometer -10 to 10" WC |
| T140 | T-140-200"WC Pressure Calibrator Manometer -200 to 200" WC |
| T140 | T-140-30 Pressure Calibrator -15 to 30 PSIG |
| T140 | T-140-100 Pressure Calibrator -15 to 100 PSIG |
| T140 | T-140-300 Pressure Calibrator 300 PSIG |
| T140 | T-140-3000 Pressure Calibrator 3000 PSIG |
Pressure Calibrator Manometer
| Ranges | -15.00 to 30.00 PSIG/PSID -15.00 to 100.0 PSIG/PSID 300.0 PSIG 3000 PSIG ± 10" H2O ± 200" H2O (0 - 7 PSI) |
| Accuracy 18 ° C to 28 ° C | ±
10" H2O ±
0.1% of FS ± 200" H2O ± 0.05% of FS 30 PSI ± 0.05% of FS 100 PSI ± 0.05% of FS 300 PSI ± 0.05% of Rdg ± 2 LSD 3,000 PSI ± 0.05% of Rdg ± 2 LSD |
| Resolution | ±
10" H2O 0.001" H2O ± 200" H2O 0.01" H2O 30 PSI 0.001 PSI 100 PSI and 300 PSI 0.01 PSI 3,000 PSI 0.1 PSI |
| Engineering Units | PSI, inH2O, cmH2O, mmH2O, mH2O, FtH2O, mBAR, BAR, inHg, mmHg, cmHg, kPa, kg/cm2, TORR, ATM |
| Temperature Stability | ± 0.01% FS/° C; 0 ° C to 18 ° C, and 28 ° C to 50 ° C |
| Maximum Overpressure | Ranges more than 100 PSI 2x Ranges less than 30 PSI 3x |
| Ports | Two 1/8" FNPT |
| Media | 30/100 PSI, 10" H2O, 200" H2O non-corrosive gas or
liquids 300/3,000 PSI all media |
| Environmental | Operating temperature 0 °
C to 50 °
C Storage temperature -20 ° C to +60 ° C |
| Mechanical | Dimensions, without boot 5.7" H x 3.5" W x 1.43" D (144.7 x 80.0 x 36.3 mm) Weight 14 ounces (396 gms.) |
| Power Requirements | 1, 9 Volt alkaline battery |