MC-1010 Process Calibrator
The MC-1010 Process Calibrator
provides the combination of a high accuracy calibrator
and common Multimeter DMM functions.
This Process Calibrator will calibrate virtually any process
device — read and source thermocouples,
RTDs, Ohms, Voltage, current, frequency, pressure and test
continuity as well.
The MC-1010 Process Calibrator is compatible with BETA pressure
modules with the addition of a simple
connector/adapter.
The MC-1010 Multifunction Calibrator features a simple user
interface, large display, and an RS232 interface.
MC1010 Multifunction Process Calibrator
Model | Description |
---|---|
MC-1010 | Process Calibrator include: Protective Rubber Boot, Test Leads, Batteries, Instruction Manual and NIST Calibration Certificate. |
±
0.4 °
C thermocouple/±
0.3 °
C RTD accuracy
±
0.015% of reading electrical accuracy
Ten (10) T/C types and eight (8) RTD types plus YSI 400
Read and source modes
Full function 4 to 20 mA read, source, simulate, and read/power
modes with ±
0.015% of reading accuracy
Source or read 0 to 20 Volts (±
0.015% of reading accuracy)
Measure 0 to 250 VDC or VAC
Direct keyboard entry enables quick output changes
Store up to nine (9) setpoints for each output function
RTD function compatible with all pulsed transmitters
Pressure Ranges | Various ranges in 29 different pressure modules | ||
T/C Ranges | J, K, T, E, R, S, N, B, L, U including – 10 to 75 mV | ||
RTD Ranges | Pt 385 (100, 200, 500, 1000 Ohms) Pt 392, JIS, Ni120, Cu10, YSI400 | ||
Ohms Ranges | 0 to 400.00 and 400 to 3,200 | ||
mA Range | 0 to 24.000 mA | ||
Voltage | (Low) Read 0-20.000 VDC Source 0-20.000 VDC (High) Read only 0-250 VDC or VAC |
||
Frequency | Source | Measure | |
CPM | 2.0 - 1,000.0 | 0.0 - 1,000.0 | |
Hz | 0 - 1,000 | 0.0 - 1,000.0 | |
kHz | 1.0 -10.0 | 0.00 -10.00 | |
Continuity | 0 to 400.0 Ohms, audible tone when under 10 Ohms | ||
Accuracy | T/C Type J: ±
0.3 °
C ±
10 mV (±
0.4 °
C
total error) RTD Pt 100: ± 0.1 ° C ± .075 Ohm (± 0.3 ° C total error) Ohms (400): ± 0.1Ohm Ohms (3,200): ± 1.0 Ohm |
||
mA Compliance | Up to 1,000 load | ||
Voltage Drive Capability | 1 mA | ||
RTD IEX-Range | 0.01 mA to 3 mA | ||
RTD Frequency Response | 10 ms – works with all pulsed transmitters | ||
Environmental | Operating Temperature -10 °
C to 50 °
C Storage Temperature -20 ° C to 70 ° C |
||
Power Requirements | 6 VDC Batteries 4 AA alkaline batteries, 25 hours typical operating time | ||
Mechanical | Dimensions 8.7" H x 4.2" W x 2.3" D
(220.9 x 106.6 x 58.4 mm) Weight 30.5 ounces (863 g) |
||
Accessories Included | Test leads, 4 x AA alkaline batteries, NIST Certificate, and instruction manual |
||
Optional Accessories | Carrying Case, Model CC572 |