560-2 Tester.
560-2 Refrigeration system tester with vacuum sensor. stainless steel versions: NH3
testo 560-2 measures pressures on the high and low pressure side of refrigeration units.
The pressure connections are made of stainless steel.
Corresponding temperatures can be measured using cable or wireless probes.
A total of four temperature measurement points can be shown.
560-2 Refrigeration system tester
Model | Description |
---|---|
560-2 | Refrigeration system tester with vacuum sensor. |
The 4-way battery facilitates all conventional operations.
A vacuum sensor measures absolute pressure and indicates the corresponding evaporation temperature
of water.
The vacuum cell is protected against high pressures by a special valve. 30 refrigerant curves are
permanently stored in the meter.
Additional refrigerants can be downloaded free of charge from the Internet.
The wide selection of cable and wireless probes enables flexible measurement of different media and
objects.
The use of different instruments is unnecessary on account of built-in pressure sensors and simultaneous temperature measurement.
Pressure media: CFC, HFC, N, H2O, CO2,- 2 stainless steel versions: NH3
Operating temperature | 32 to +122 ° F |
Battery type | 4 Type AA batteries |
Battery life | 40 h |
Probe type Pt100 | |
Meas. range | -20 to +200 ° C |
Accuracy | Class B ± (0,3 +0,005 tl) |
Resolution | 0.1 ° C |
Probe type Low pressure probe | |
Meas. Range | 25 bar |
Resolution | 0.1 bar |
Probe type High pressure probe | |
Meas. Range | 50 bar |
Accuracy | 0.1 bar |
Resolution | 100 bar |