50132-G-01 Voltage Sensor 0 - 115 kV.
50132-G-01 Voltage Sensor 0 to 115 kV, 50132-G-02 Voltage Sensor 0 to 115 kV with hot sticks.
The Model 50132-G-01 Voltage Sensor is used to detect the presence of voltage or capacitance on overhead or underground cabling or on switch gear and MCC Panels.
It is an excellent mistake-proof safety tester to check lines, bus bars, or capacitors before crews start to work.
Voltage Sensor 0 - 115 kV
|50132-G-01||Voltage Sensor 0-115kV|
|50132-G-02||Voltage Sensor 0-115kV with Hot Sticks|
Two degrees of sensitivity are offered by this unit, capacitance and direct line contact.
The more sensitive range “Capacitance Test” will produce a minimum scale deflection at 300 volts.
This positive, no-mistake indication is produced when the tester is applied directly to an exposed bus or terminal. Contact with the capacitance test point of a separable elbow connector carrying 25kV
will also produce scale deflection.
Higher voltages will produce higher deflections. When the unit is placed on “Direct Line”, higher voltages can
be checked; this will allow the Model 50132-G-01 to be applied directly to potentials through 115kV.
This completely shielded tester reads only the contacted test point; no stray fields will be indicated.
The Model 50132-G-01 Voltage Sensor comes in a sturdy foam-lined carrying case.
|50118-G-02||1/2 Set of Hot Sticks|
|30142-P-01||Shot Gun Adapter|
|50131-G-01||C-Clamp for Grounding|